[ddots-l] Re: Recording issues
- From: "Mike Christer" <m-christer@xxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 12 Oct 2009 18:14:54 +0100
Hey Jim!
You'll only be able to monitor one track's input level/peak meter reading at a
time.
So, you'll have to arm each track separately and take an input level reading,
then switch to the other...
Of course, you'll be able to record the 2 trax simultaneously!
I think this could be the prob?
Mike
----- Original Message -----
From: Jim Jackson
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, October 12, 2009 5:31 PM
Subject: [ddots-l] Recording issues
Hello all, I'm attempting to record vocals, I have things set up as follows,
vocal mic 1, audio track 1 and input set to left-acio fw-1884analog1 the cable
from the mic is plugged in to the far left slr slot on the back of the tascam
as I face the front of the unit. No prob with this one, I can both hear the
audio and can monitor the peak levels.
The second audio track is vocal mic 2, Input set to left acio fw-1884analog3,
the cable from the mic is plugged in to the next slr slot. I can hear the
audio from the mic but the peak meters are not changing, I go in to record and
get nothing. BTW, on both tracks the output is set to master.
What am I doing?
Jimmy
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.421 / Virus Database: 270.14.12/2431 - Release Date: 10/12/09
13:01:00
Other related posts:
