[ddots-l] Re: Question about Sonar and Pro Tools

Phil:
My friend is sighted and she does have experience with Pro Tools.  She will be 
the one operating Pro Tools and doing the exporting of the projects.



From: Phil Muir 
Sent: Saturday, January 02, 2010 8:52 AM
To: ddots-l@xxxxxxxxxxxxx 
Subject: [ddots-l] Re: Question about Sonar and Pro Tools


Charles.  How are you going to do the export from Pro Tools in Windows, baring 
in mind the fact that there's no accessibility at all for Pro Tools in Windows?



Regards, Phil Muir
Accessibility Training
Telephone: US (615) 713-2021
UK+44-1747-821-794
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxxxxxxxxxxxxxxxxx
URL:
www.accessibilitytraining.co.uk/
  -----Original Message-----
  From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]On 
Behalf Of Charles Marston
  Sent: 02 January 2010 13:18
  To: ddots-l@xxxxxxxxxxxxx
  Subject: [ddots-l] Question about Sonar and Pro Tools


  All:
  I have an ADK Pro Audio computer that I got through DancingDots with Sonar 
8.5.2 and CakeTalking 8.5.4.  I use an M-Audio ProjectMix as my audio interface.
  Now, I have a friend who would like to do some work with me on four projects 
recorded with Pro Tools.
  Here is my question:  Would it be OK if I install Pro Tools in my system in 
order to open these projects and export them to Sonar?  I have been working 
with Sonar for about 7 months and my whole system works very nice for me.  I 
would not like to create any conflicts or unknowingly change some settings that 
could affect the way either Sonar or my computer works.
  Can Sonar and Pro Tools coexist peacefully in the same XP-pro environment?
  Are there any settings in Pro Tools or any plug-in that I should be careful 
with during installation?    

  Finally, if it is OK to install Pro Tools, do you know what is the best way 
to export a project from Pro Tools to Sonar?  I have seen some references to 
the OMF format.  Can I get that from Pro Tools?

  My friend is sighted and she does have some experience with Pro Tools, so she 
will be doing the actual exporting of the projects.

  Thanks in advance for your advise.

Other related posts: