[ddots-l] Re: Problems Sustaining Notes

Hi,

Just been reading up a bit on Sonar 5's step recording and yes, you do need
a means of getting notes into the machine.  There was a thread a little
while ago about using the QWERTY keyboard as a note input device - does
anybody have the details, please?  If there is a method of doing this, then
we have a complete step recording system with no MIDI controller or keyboard
required. 


Best wishes.

Tim Burgess
Raised Bar Ltd
Phone:  +44 (0)1827 719822

Don't forget to vote for change at http://www.raisedbar.net/petition.htm
 
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Sandy Licht
Sent: 28 September 2006 00:18
To: ddots-l@xxxxxxxxxxxxx; ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Problems Sustaining Notes

Don't you have to use a midi controller of some kind to use step recording?
In Sonar 5, step recording is definitely more user friendly than it was in
Sonar 2.

At 04:28 PM 9/27/2006, Tim Burgess wrote:
>Hi,
>
>There's the step recording mode.  Haven't played with it for a while, 
>but this method of recording made a lot of folks a lot of money in the 
>80s (giving away my age...).
>
>Best wishes.
>
>Tim Burgess
>Raised Bar Ltd
>Phone:  +44 (0)1827 719822
>
>Don't forget to vote for change at 
>http://www.raisedbar.net/petition.htm
>
>-----Original Message-----
>From: ddots-l-bounce@xxxxxxxxxxxxx 
>[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Rosser
>Sent: 27 September 2006 21:44
>To: ddots-l@xxxxxxxxxxxxx
>Subject: [ddots-l] Re: Problems Sustaining Notes
>
>Hi Tim, my name is Ross, I also am wanting to make use of the piano 
>roll in sonar 5. I see what you are saying about jaws not being 
>accessible in the piano roll window, I was wandering is there any other 
>way of creating bassline,synth patterns without using the piano roll. 
>Obviously also without using a keyboard or some instrument, I want to 
>be able to do it myself on the computer. thanks Ross
>----- Original Message -----
>From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
>To: <ddots-l@xxxxxxxxxxxxx>
>Sent: Sunday, September 24, 2006 8:05 PM
>Subject: [ddots-l] Re: Problems Sustaining Notes
>
>
> > Phil,
> >
> > The Piano Roll is a sort of half-way house between step record 
> > editing and editing using the Event View.  It's a lot easier for a 
> > sighted person to see where notes line up to others at their start 
> > and end points when using this view, so it's really useful if you're 
> > preparing patterns, drum or otherwise, that you're intending to 
> > loop, as you can make note durations, etc, really tight without having
to quantise.
> >
> > Must have another look at it myself to try and figure out how you 
> > could express its output in speech and/or Braille, but it certainly 
> > wouldn't be easy, though it would be great if we could make it possible.
> >
> > It's absolutely the right thing to do to define to a manufacturer 
> > why we need something to work then offer suggestions as to possible 
> > methods of making it happen.
> >
> > Best wishes.
> >
> > Tim Burgess
> > Raised Bar Ltd
> > Phone:  +44 (0)1827 719822
> >
> > Don't forget to vote for change at
> > http://www.raisedbar.net/petition.htm
> >
> > -----Original Message-----
> > From: ddots-l-bounce@xxxxxxxxxxxxx
> > [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
> > On
> > Behalf Of Phil Muir
> > Sent: 24 September 2006 08:48
> > To: ddots-l@xxxxxxxxxxxxx
> > Subject: [ddots-l] Re: Problems Sustaining Notes
> >
> > Hi Sean!!
> >
> > It's a view that's never been supported by CT.  My guess is that, if 
> > it were scriptable then, David would have done it by now.
> >
> > I need to take a look at it again.  Looked at it briefly however, 
> > still not entirely convinced that, it's a view that could be made 
> > really accessible in it's current state, ether with CT or, JSonar.
> > For example, if you locate a MIDI note in there, pressing enter on 
> > it, won't allow you to alter the value.
> >
> > Also, the various values in the piano roll view, only spoke in 
> > JSonar, when I set the Jaws highlight to "Say All."  Perhaps if we 
> > had a good understanding of what the piano roll view is used for 
> > then, we could present a good case to 12 tone, explaining why it 
> > doesn't work in it's current state, and what would be required to put it
right.
> >
> > It would be worth you getting some of your eyes over there to take a 
> > look at it with you.  That would probably confirm it for you.
> >
> > Regards, Phil Muir
> >
> > ----- Original Message -----
> > From: "Sean A. Cummins" <Sean@xxxxxxxxxxxxx>
> > To: <ddots-l@xxxxxxxxxxxxx>
> > Sent: Saturday, September 23, 2006 5:16 PM
> > Subject: [ddots-l] Re: Problems Sustaining Notes
> >
> >
> >> Why is that Phil?!
> >>
> >> SeanA!
> >>
> >> ** To leave the list, click on the immediately-following link:-
> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >> ** If this link doesn't work then send a message to:
> >> ** ddots-l-request@xxxxxxxxxxxxx
> >> ** and in the Subject line type
> >> ** unsubscribe
> >> ** For other list commands such as vacation mode, click on the
> >> ** immediately-following link:-
> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> >> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
> >> Subject:- faq
> >>
> >>
> >
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** ddots-l-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** ddots-l-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >
>
>** To leave the list, click on the immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>** If this link doesn't work then send a message to:
>** ddots-l-request@xxxxxxxxxxxxx
>** and in the Subject line type
>** unsubscribe
>** For other list commands such as vacation mode, click on the
>** immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>** or send a message, to
>** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>** To leave the list, click on the immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>** If this link doesn't work then send a message to:
>** ddots-l-request@xxxxxxxxxxxxx
>** and in the Subject line type
>** unsubscribe
>** For other list commands such as vacation mode, click on the
>** immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>** or send a message, to
>** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.1.407 / Virus Database: 268.12.9/457 - Release Date: 
>9/26/2006


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: