[ddots-l] Re: Problem wiht Sonar 7 and CT 7

Problem might be solved. Being cautiously optimistic. Thanks for your support 
and guidance. If you're curious, here are the steps that seemed to fix it:

1. First I installed CT 7 to JAWS 9 and the problem remained.
2. As I told HF I also tried JAWS 8 with Sonar 7 and it didn't work.
3. However I decided to install CT 7 to JAWS 8 just for the heck of it, and 
JAWS 8 worked.
4. Went back to JAWS 9 and it didn't work.
5. Used the JAWS merge utility to merge JAWS 8 settings to JAWS 9.

Fixed. Go figure. Must have been some other JAWS settings file that affected 
Sonar 7.

BTW CT 7.0.43 for Sonar 7 is the version that downloaded from Dancing Dots this 
morning. What newer CT 7 version do you have?

As I said, I'm cautiously optimistic at this point.

Dave

  ----- Original Message ----- 
  From: Dave Carlson 
  To: ddots-l@xxxxxxxxxxxxx 
  Sent: Thursday, November 27, 2008 9:04 PM
  Subject: [ddots-l] Re: Problem wiht Sonar 7 and CT 7


  Sorry HF, but this was working fine with JAWS 9 originally. I also tried it 
with JAWS 8 and got the same strange results.

  I just re-installed CT 7.0.43 (latest) and problem remains. It's as though 
it's a JAWS problem, like it won't speak in certain dialogs. But the fact that 
the dialogs come up speaking when Sonar is in restored and not maximized 
doesn't seem like a JAWS problem - it seems like Sonar or CT.

  Dave

    ----- Original Message ----- 
    From: HF 
    To: ddots-l@xxxxxxxxxxxxx 
    Sent: Thursday, November 27, 2008 3:38 PM
    Subject: [ddots-l] Re: Problem wiht Sonar 7 and CT 7


    Get the latest version of Ct and give that a try. If still have a problem, 
try using a different version of Jaws like 7 or 8.

    HF
      ----- Original Message ----- 
      From: Dave Carlson 
      To: ddots List Server 
      Sent: Thursday, November 27, 2008 1:12 PM
      Subject: [ddots-l] Problem wiht Sonar 7 and CT 7


      Hello,

      Something strange has happened.

      JAWS 9
      Sonar 7.02
      CT 7.0.43

      In any project after pressing F6 to refresh I can't navigate the Ctrl-D 
or the f4 dialogs. Some other dialogs work but these two in particular do not. 
I hear the "ding" that indicates they are opening but do not hear anything if I 
arrow up/down. I can hear each item if I use the Insert+Keypad 5 reading key.

      JAWS is set properly to read highlights and the verbosity is set to the 
beginner level.

      Moreover if I then restore the screen, these dialogs become readable 
normally.

      I've re-installed CT 7 just to be sure and the problem remains.

       Yes, screen resolutions and colors and all display requirements are per 
CT requirements.

      Help me before I try to restore back several weeks.

      Dave

      After opening and allowing the normal project to load (two audio, two 
midi)

Other related posts: