[ddots-l] Re: Ok, really confused about arming and remote controlling FX parameters.
- From: "Phil Muir" <philmuir1@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Wed, 10 Aug 2005 09:53:43 +0100
Great idea however, one problem with the track inspector at the moment is the
fact that you are
limited to how many affects parameters you can actually access at one time.
For example, if you
insert the Sonatus Gate and the Sonatus compressor then, you can actually only
access parameters of
the last affect inserted. Gord, any way around this one?
Regards, Phil Muir
P J Muir Productions
URL:
www.philmuir.com/
----- Original Message -----
From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, August 10, 2005 4:12 AM
Subject: [ddots-l] Re: Ok, really confused about arming and remote controlling
FX parameters.
> Chris:
> First of all, you can't arm the amp sim because it is a very old effect
> that did not conform to todays standards for automation. You have to
> assign the parameters you want to control from within the track
> inspector.
> Gord
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
> On Behalf Of Christopher Bartlett
> Sent: Tuesday, August 09, 2005 4:36 PM
> To: ddots-l-freelists.org
> Subject: [ddots-l] Ok, really confused about arming and remote
> controlling FX parameters.
>
> I have a bus with three effects patched into it. First, I have the
> Sonitus
> gate, then the fx-reverb, then the amp sim. I am trying to arm
> parameters
> with a view to remote controlling them from my radium keyboard's
> programmable controls.
>
> 1. I know how to get to the arm parameters dialogue either in the bus
> inspector or from the context menu in the fx bin itself. I understand
> checking the parameters I want to arm.
>
> 2. For the amp sim effect, the menu item for arming parameters is
> unavailable. Does this mean I can't arm/remote control this effect at
> all?
>
> 3. Ok, so I've armed the parameters. Where do I control them from
> during
> an automation record session? In the case of the Sonitus gate, the
> dialogue box is inaccessible. In the case of the reverb effect, all its
>
> controls are edit boxes, not sliders, and thus not subject to
> manipulation
> in real time?
>
> 4. The whole point of the exercise is to attach them to the sliders and
>
> knobs on my radium, and nowhere do I see the remote control option that
> comes up in the context menus of things like the volume control on the
> bus/track. Am I missing something?
>
> A confused Chris Bartlett
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
