[ddots-l] My motu sounds like a popcorn machine!

Hi to all.
I'm having problems with my Motu 2408MK2.
I am running the busses from my board in to my ADAT's.
One ADAT XT, which is the master in the ADAT's, and two ADAT black face version 4.03.
I'm running this in to the optical ins of my Motu 2408MK2, but I'm getting a constant click, click, click, on channels 1 and 2.
I don't get clicks on the other channels until I feed it some audio.
I have sonar 3.11 at 48 K 16 bits, even though I have tried it at 24 bits.
The motu is also running at 48 K with a buffer of 512, even though I have tried it any where from 32 to 1024.
Same problem!
I have tried the adats on all 4 clock settings, but no go.
I have tried the Motu on all of the sink settings, but it only works on the PCI324, and on the optical.
Same results on either one.
I even tried every thing at 44.1, but all that happens is that the click gets faster.
I was this close to buying a FW1884 today, but couldn't go through with it thinking that I already had this other beast at home, well, and that I would have to charge it to my credit card.
By the way, my computer is a P4 2.8 with one gig of ram and two hard drives.
Any suggestions?
I'm falling way behind with the little work that I have, and if
If I don't get it working pronto, I'll have no work! Lol!
Thanks in advance!

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: