[ddots-l] Re: Merry Christmas to all.

Hi There!!

I use the MOTU 2408 with the mkII interface.  The Q mix concel which as far as 
i can tell is MOTU's
built in mixer isn't accessible however, I never use it anyway as I do all of 
my mixing and routing
from within Sonar.  I can still easily change items such as sample rate and 
where the main outputs
from the card are sent via the MOTU control panel which, is accessible.

Regards, Phil Muir

----- Original Message ----- 
From: "Lewis Alexander" <lewisalexander@xxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Thursday, December 23, 2004 6:44 PM
Subject: [ddots-l] Re: Merry Christmas to all.


> Hi kevin and all.=20
>
> In reference to the motu series of cards. The motu 2408 mkIII  is =
> available
> as standalone (the expansion only) and as a core system (PCI card and
> external module)
>
> Personaly oif you are going to do a major quantity of recordings. Go for =
> the
> motu 24io with the core system. You have 24 channel line ins and outs at =
> 24
> bit rates. The question is however. Is the Q mix software accessible =
> under
> jaws? If not then you would be best going for the delta 1010 cards or =
> delta
> 1010lt cards. They are good quality and great for the price. Directly
> accessible via sonar and you can set up a 32 channel interface for about
> =A3800 uk price with the delta 1010lt system setup. The software for =
> deltas is
> completely accessible with jaws.
>
> I just enquired about running the 4 as I had a plan of using them in XP =
> pro
> service pack 2 with the forth coming release of caketalking for sonar 4 =
> and
> sonar 4 producer. This is so I can go on tour and record as well as =
> teach
> visually impaired and blind students to record with sonar.
>
> Oh by the way.
>
> Great news for any one looking for high quality accessible controllers =
> and
> recording interfaces..
>
> Here are some great recommendations for you. I've tested them under =
> sonar
> 2.2 and sonar 3.11  (the later version 3.11 was at a friend's so not my
> personal version)
>
> Yamaha o1X digital recording workstation.
> Not only a great interface for recording, it mixes, has hardware DSPs =
> and
> direct monitor outputs. Suitable to work in conjunction with the yamaha
> motif. I personally love this one as it feels great and does the job.
>
> There are four products from tascam which will get your mouth watering.
>
> FW1884 interface: digital recording workstation, controller, mixer and
> automation for sonar. Great tool
> FW1084: as above but cheaper and less inputs/outputs.
> FW1804: rack version of the above systems for module only work without =
> the
> means of all that control.
>
> And the moment you doods have been waiting for. Yes a direct 24 channel
> remote console for sonar. Has 25 motorised faders including the master
> fader, control pots and all the recording features. This is a control
> surface only but great for the work if going heavy duty without wanting =
> a
> hefty desk.
>
> Ladies and gentlemen. The us-2400.
>
> This will allow you the use of your internal cards or external cards, =
> midi
> sequencing and audio needs. You'll love it
>
> I'm not a promoter. Just someone who knows good hardware when I test it =
> all.
>
> lew
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: