[ddots-l] Re: M Audio Axiom 49

if it works the same way as the radium and keystation series, the procedure 
is this:
press the select button, the one beneath the display, then play the second 
higher f on the keyboard, this means the second f from right to left.
this is to select the assign control parameter, then play the highest c to 
the right  which is enter, then you can  play  from the highest c sharp to 
the highest  b flat as the numbers zero to nine, to enter the  slider or 
knob you want to assign. then hit the highest c to enter and then the 
numbers again to enter the controller number you want to send. then enter 
again, then the number for the midi channel, and enter again, finally the 
select button again to get out of edit mode.

----- Original Message ----- 
From: "Stacy Bleeks" <sbleeks@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Saturday, October 27, 2007 8:59 PM
Subject: [ddots-l] M Audio Axiom 49


> If anyone has this midi controller, have you been able to assign effects 
> etc. to the knobs and faders.  I thought there were some presets but can't 
> find them.  The TTS seems to be working for some effects straight out of 
> the box but that's it.
>
> Will I need to get someone with good eyes to help out?
>
> Any direction or ideas are much appreciated.
>
> Stacy
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the 
> Subject:- faq
> 


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: