Guys,
Here’s an interesting problem. As you may know, My wife and I have been
reassembling my studio. All has been pretty cool. Unfortunately, I have one
small problem. My Korg Triton, which is my master controller, is not giving me
sound in Sonar when local echo is set to off. Historically, I’ve had local
echo off for at least the past 12 years without issues. But last night, I
fired up my rig without connecting my iLock and Vienna Dongles and that caused
some problems until I remembered to reconnect them. At that point, I had not
connected audio cables to the Korg and hadn’t given much thought to sound from
the Korg.
Tonight, when I finally connected the audio to the Korg, I got no sound in
SONAR. First, I thought maybe the audio interface was failing. But, I turned
Local Echo on and heard the Korg loud and clear through the speakers. Then, I
noticed that my Korg was not responding to MIDi program change messages sent
either by SONAR or by scrolling through programs locally on the machine when in
Sequencer Mode, the mode I’ve always used when working with SONAr. Any idea
what could be wrong? Further work has revealed that the Korg responds to
program changes locally with local echo on and the Korg in Combi or Program
mode. The problem seems to only be in sequencer mode. Thoughts?PLEASE READ
THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject�q or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq