[ddots-l] Re: Issue with my mac book and Tascam FW1884.

Actually, just a little correction here. The only thing I absolutely need to use my control surface for is to dynamically change volume. In other words, the faders are not visible to the screen reader. Further, I happen to have an expensive control surface but any surface using the HUI protocol will work. For what it's worth, JAWS and Window Eyes apparently see a whole bunch of things in the latest version of Pro Tools. With each new version of PT coming out, I think it's a good idea for people to check out the state of things. For that matter, the new PT 8 which is coming out in a couple of months, the user interface has been completely redesigned with customizable windows and displays. Definitely worth another look on the Windows side.


Cheers,

Slau

----- Original Message ----- From: "Phil Muir" <ddots@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Monday, November 24, 2008 1:20 AM
Subject: [ddots-l] Re: Issue with my mac book and Tascam FW1884.


We can't use it easily. Jerry is definitely the exception with regard to using Pro Tools. also, Jerry has quite a hi end control surface that he uses in order to drive Pro Tools on a Mac. In other words, Jerry is using the control surface to achieve most of his accessibility, rather than the Mac itself.

Regards, Phil Muir

P J Muir Productions,
Music And Audio Production
Telephone: US (615) 713-2021
UK+44-1747-821-794
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxx
URL:
www.philmuir.com/
----- Original Message ----- From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Monday, November 24, 2008 5:59 AM
Subject: [ddots-l] Re: Issue with my mac book and Tascam FW1884.


Oh I didn't know that we blind peeps could use that. How does it work? I
thought it was not accessible. Is it?


God bless you!

WEBSite www.nevillepeter.com

Email neville@xxxxxxxxxxxxxxxx

Phone 407-222-4488

-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Sean A. Cummins
Sent: Monday, November 24, 2008 12:45 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Issue with my mac book and Tascam FW1884.

Pro tools
----- Original Message ----- From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Sunday, November 23, 2008 10:38 PM
Subject: [ddots-l] Re: Issue with my mac book and Tascam FW1884.


What's Pt?


God bless you!

WEBSite www.nevillepeter.com

Email neville@xxxxxxxxxxxxxxxx

Phone 407-222-4488
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On
Behalf Of Slau
Sent: Sunday, November 23, 2008 12:12 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Issue with my mac book and Tascam FW1884.


----- Original Message ----- From: "Phil Muir" <ddots@xxxxxxxxxxxx>
Hay slau!

Don't want to make you or anyone else feel sad.  sorry if I came across
as

not caring. I personally have a lot of respect for people like yourself
who work on a Mac using PT.

Oh Phil, nevermind me. It's a knee jerk reaction on both our parts.
Whenever

I hear about somebody having a problem with their Windows machine, my
first
inclination is to say, "Well your first problem is that you're using
Windows." Without, of course, considering that it may be user error, a
third

party software conflict or, as in this case, a hardware issue which, I
wasn't aware of because I never had such a FireWire issue. Thanks to Kevin for that info. At any rate, yes, it did sound like a categorical dismissal
of which I'm often guilty. thanks for the clarification.

Cheers,

Slau

PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq


PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq


PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq


PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq


PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq


PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq

Other related posts: