[ddots-l] Re: Installation questions

It is not a sampled based synth like dimension pro. It is a wave table synth, which uses tiny slices of wave forms as the foundation for the sounds and then applies filters, envelopes, modulators etc. It is really apples and oranges as far as comparing them goes. 
Gord
----- Original Message ----- From: "neville" <neville@xxxxxxxxxxxxxxxx> 
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, August 29, 2007 9:16 AM
Subject: [ddots-l] Re: Installation questions
How is it different from dimension pro? What are the sounds like? Does it have as large of a sound library as Dimension pro? ----- Original Message ----- From: "Tim Burgess" <tim@xxxxxxxxxxxxx> 
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, August 29, 2007 7:02 AM
Subject: [ddots-l] Re: Installation questions



Hi,

Rapture is a very powerful synth, but isn't very accessible directly from
its user interface (although a lot of parameters can be controlled via
automation/remote control).

I've got some very basic HSC files, but they're far from complete.  I'll
pass them on to www.hotspotclicker.org when they're more complete and let
the list know.

Best wishes.

Tim Burgess
Raised Bar Ltd
Phone:  +44 (0)1827 719822

Don't forget to vote for improved access to music and music technology at

http://www.raisedbar.net/petition.htm

-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On 
Behalf Of Greg Brayton
Sent: 29 August 2007 10:52
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Installation questions

Well I'm pretty sure it said register when I installed 4, but I'm gonna
install 6 this morning., Can't hardly wait! Hey do I have this rapture
software bundled with sonar 6, or would I have to get that later? Has anyone 
tried it? Is it easy to use? Are there good sounds to be played with?
http://www.gbrayton.com
----- Original Message ----- From: Gordon Kent <mailto:dbmusic@xxxxxxxxxxxx> 
To: ddots-l@xxxxxxxxxxxxx
Sent: Wednesday, August 29, 2007 1:15 AM
Subject: [ddots-l] Re: Installation questions

When is it asking you to register plug-ins?  I've never seen that
particular prompt.  Do you mean scan plug-ins?
Gord
----- Original Message ----- From: Greg Brayton <mailto:greg@xxxxxxxxxxxx> 
To: ddots-l@xxxxxxxxxxxxx
Sent: Tuesday, August 28, 2007 2:09 PM
Subject: [ddots-l] Re: Installation questions

I think I'm happy with what sonar gives me, so do I still
say yes when they say register plugg ins? I mean am I registering the sonar 
pluggins? Sorry it takes me so long to get it buddy.
http://www.gbrayton.com
----- Original Message ----- From: Gordon Kent <mailto:dbmusic@xxxxxxxxxxxx> 
To: ddots-l@xxxxxxxxxxxxx
Sent: Tuesday, August 28, 2007 11:29 AM
Subject: [ddots-l] Re: Installation questions

Well, each version of Sonar is coming bundled with
more and more plug-ins. It is really getting to the point where you can get by with Sonar alone. The vc64 is a wonderful multi-band compressor/channel 
strip.  It would be nice if the tts1 were updated with some really good
sounds on a par with say the motif, but I wouldn't fret too much about
getting more stuff except for maybe a better time compression plug if you
needed that sort of thing.
Gord
----- Original Message ----- From: Greg Brayton 
<mailto:greg@xxxxxxxxxxxx>
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, August 27, 2007 1:00 PM
Subject: [ddots-l] Re: Installation
questions

Gord I'm not sure what I have. I have soft
synths but those aren't plugg ins right? I have all the stuff that comes
with sonar, but I can't think of anything else I've picked up. Do those
sonar pluggins need to be registered? I don't own anything like the wave
arts, or any other compressers or choruses that don't come with sonar. Since that is the case do I still let it do that or is it not necessary. Maybe I should have some other plugg ins. Maybe you can tell me what I shou;ld try 
to get. I should say try to afford.
http://www.gbrayton.com
----- Original Message ----- From: Gordon Kent 
<mailto:dbmusic@xxxxxxxxxxxx>
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, August 27, 2007 11:52
AM
Subject: [ddots-l] Re: Installation
questions

Greg:
When cakewalk is asking you if you
want to register your plug-ins, it isn't talking about registering them with 
the companies that make them.  It is referring to the process of telling
Sonar that you have these plug-ins and where they are on your system. You should let it do that. You need to have sonar on your system before you can install cake talking. It doesn't matter if you install plug-ins afterwards. 
Gord

----- Original Message -----

From: Greg Brayton
<mailto:greg@xxxxxxxxxxxx>
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, August 25,
2007 7:52 AM
Subject: [ddots-l]
Installation questions


Last time i installed sonar,
I didn't have any soft synths,
http://www.gbrayton.comso
when it asked me to register plugg ins, I just said no.; Now I have,
dimension, stinberg hypersonic, lounge lizard, and trilogy. I've registered 
those already,  but will I need to re register them?Should I install
caketalking first or later? Anything else I should know? I'm so excited!!! 

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq






** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq 



** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: