Jean:Well, this is a situation where we need to demonstrate it to Freedom Scientific. If Jaws is seriously degrading system performance to that degree, it is not accessible.
Gord----- Original Message ----- From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx> Sent: Wednesday, May 02, 2007 4:10 AM Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2 You don't even have to unload Jaws to alleviate the problem! If you do a pass true, Insert 3, the audio runs very quickly.Even if you load a version of Jaws that have no sonar scripts, everything is fine. So, perhaps the problem lies somewhere within the scripts or the control surface. I'm working on this as this problem is impairing my ability to do any serious work. I deal with very large projects most of the time with 40 to 60 stereo tracks and upwards of 30 plug-ins/effects. The sluggishness prevents me to do any meaningfull automation and real time effect parameters tweeking. These scripts work fine if you have only a few tracks and/or plug-ins and that is probably the case with most users! Before you ask me, my DAW is an Intel Core 2 Duo, 6600 processors running at 2.4 GHz with 2 GIG of DDR 2 Ram and 2 SATA 7200 hard drives.
It can really crunch numbers!!! Jean Please visit my site at http://www.studiomontebello.comYou can also visit my girlfriend's art gallery at http://www.marie-helenemasse.com
----- Original Message ----- From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx> Sent: Tuesday, May 01, 2007 11:57 PM Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
Well, I do have to agree that there are times when I have noticed that Sonar will start getting glitchy and unloading jaws stops the problem. I think we need to investigate this further. It may ave something to do with jaws andthe osm (off screen model) having to constantly update itself. I should probably try this with a demo of window eyes to see if we have the same problem. Gord----- Original Message ----- From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>To: <ddots-l@xxxxxxxxxxxxx> Sent: Tuesday, May 01, 2007 4:20 PM Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2 But Gordon, I'm not running Sonar 6 with Jaws 6.2.I'm running it with Jaws 7.0 with the CT scripts and Jaws 7.1 with J Sonar.Jean Please visit my site at http://www.studiomontebello.com You can also visit my girlfriend's art gallery at http://www.marie-helenemasse.com----- Original Message ----- From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>To: <ddots-l@xxxxxxxxxxxxx> Sent: Tuesday, May 01, 2007 3:28 PM Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2Jean: The problem was with Jaws 6.2 and any version of Sonar. I haven't tried running Sonar without scripts at all. I'll have to see. Gord----- Original Message ----- From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>To: <ddots-l@xxxxxxxxxxxxx> Sent: Monday, April 30, 2007 7:01 PM Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2 Hey Gordon! I'm a bit confused with your answer but I realize that it's my own fault as there was a typo in my post. It should have read "Jaws 6.2" instead of Sonar 6.2!!! But your answer is nevertheless very interesting indeed. I thought I had resolved the sluggishness issue in Sonar 6.2 by removing the X-Ray option but to my great surprise, the very next morning the problem came back almost as bad. It's hard to believe that the problem is with Sonar because when I run it without Jaws everything is perfect. Even running with Jaws without CT or J Sonar is perfect. Is this memory leakeage affecting only those of us using scripts?To me, there seem to be nothing wrong with Sonar 6.2 if you run it withoutscripts, CT or J Sonar! If my diagnostic is wright, do you think that Twelve tones and maybe Dancing Dots will give us an upgrade free?<grin>. Thanks for taking this up for me. Jean Please visit my site at http://www.studiomontebello.com You can also visit my girlfriend's art gallery at http://www.marie-helenemasse.com----- Original Message ----- From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>To: <ddots-l@xxxxxxxxxxxxx> Sent: Monday, April 30, 2007 10:34 AM Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2Jean: Well, of course you should be entitled to use what you want, but I will tell you this, and this is right from the horse's mouth (fs). There were memory leak issues with jaws 6.2 that did degrade performance with Sonar over time. These were resolved in version 7. I don't want you to think I'm just telling you this to pass the buck, but it is a reality. But I will see if I can get to the bottom of this for you. Gord----- Original Message ----- From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>To: <ddots-l@xxxxxxxxxxxxx> Sent: Monday, April 30, 2007 7:44 AM Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2 Hey Gord! Can you check on this? I'd still like to use Jaws 6.2 with CT 5. Jean Please visit my site at http://www.studiomontebello.com You can also visit my girlfriend's art gallery at http://www.marie-helenemasse.com----- Original Message ----- From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>To: <ddots-l@xxxxxxxxxxxxx> Sent: Sunday, April 29, 2007 11:18 PM Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2Well, I have a theory about this. I did have jaws 6.2 on my system as well as 7 7.1 and 8. I am wondering if the installer can only see three versions of jaws at once. Gord----- Original Message ----- From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>To: <ddots-l@xxxxxxxxxxxxx> Sent: Sunday, April 29, 2007 6:52 PM Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2 Hey Gord! That's pretty much what I'm doing now. It's not really a big deal as I am using sonar 6.2 for J Sonar 5. But, I'm still puzzled as to why I can't reinstall CT 5 in Jaws 6.2 because that's where it was before I unstalled it? Surely at some point the installer could see Jaws 6.2 and it doesn't no more. Go figure? Jean Please visit my site at http://www.studiomontebello.com You can also visit my girlfriend's art gallery at http://www.marie-helenemasse.com----- Original Message ----- From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>To: <ddots-l@xxxxxxxxxxxxx> Sent: Sunday, April 29, 2007 6:36 PM Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2Jean: If you have three versions of jaws on your system, why not use one for ct6, one for jSonar, and the other for ct5? You could run ct5 under jaws 7 for example. Gord----- Original Message ----- From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>To: <ddots-l@xxxxxxxxxxxxx> Sent: Friday, April 27, 2007 4:48 PM Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2 Hey George!Sorry about the confusion but all I want to do is to be able to installthe CT 5.3 scripts on Jaws 6.2 as they were before I unstalled them. I have Sonar 6 installed with the appropriate scripts but am not willing to work with it for now. I'm only experimenting with sonar 6 for the time being! And, my jaws 8,7.1 and 7.0 are all taken by Sonar 6 and the scripts, both CT and J Sonar. Jean Please visit my site at http://www.studiomontebello.com You can also visit my girlfriend's art gallery at http://www.marie-helenemasse.com----- Original Message ----- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>To: <ddots-l@xxxxxxxxxxxxx> Sent: Friday, April 27, 2007 2:42 PM Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2 Hi Jean, (Your message only got through because I manually approved it - and then changed the format to plain text to remove the graphics) I'm getting a bit confused here. What version of CakeTalking for Sonar do you actually want to run? If you already have the latest Sonar 6.#, I would suggest you stay with that, CakeTalking for Sonar 6.#, and JAWS 8.#. It is much easier to support the newest versions. George. -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Studio Montebello Sent: 27 April 2007 17:22 To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2 Hey George! OK for the graphics, but this one seems to have gotten thru? I need to install CT 3 5.2 or 5.3 on Jaws 6.2 because I'm already using Jaws 7.0, 7.1 and 8.0 for Sonar 6 with CT 6 and J Sonar 6. At the moment, I'm using CT 5.3 with Jaws 8.0 but I want to free it up for Sonar 6.2. When I installed Jaws 8 on my machine, I uninstalled CT 5.3 from Jaws 6.2 to put it on Jaws 8 and since then, I am no longer able to reinstall it to Jaws 6.2! It worked really well with Jaws 6.2 and I guess I should have let it alone.<grin>!!! So, that's the deal! Jean Please visit my site at http://www.studiomontebello.com You can also visit my girlfriend's art gallery at http://www.marie-helenemasse.com----- Original Message ----- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>To: <ddots-l@xxxxxxxxxxxxx> Sent: Friday, April 27, 2007 11:18 AM Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2 Hi Jean, I suspect the reason you didn't get an answer before was that your message was rejected due to the list message size limitation of 20k. Your graphics alone come to 27k. I know you should technically be able to have JAWS 6.2 running, but 7.0 or 7.1 is recommended by Dancing Dots. (See http://www.dancingdots.com/support/supportcaketalking5.htm for details) Can you also check the version of CakeTalking? You should have 5.2. George. -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Studio Montebello Sent: 27 April 2007 15:47 To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Installation of CT 5.3 on Jaws 6.2 Hello Everyone! I have asked this question before but have never got an answer! I need to install CT 5.3 on Jaws 6.2 but the install doesn't show it in the list box. Only Jaws 8, 7.1 and 7.0 appear. I have repaired Jaws 6.2 but it still doesnt show. I really need to do this and would appreciate support on this matter. Best regards, Jean Please visit my site at http://www.studiomontebello.com You can also visit my girlfriend's art gallery at http://www.marie-helenemasse.com ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
