[ddots-l] Re: Installation of CT 5.3 on Jaws 6.2

Well, I have a theory about this. I did have jaws 6.2 on my system as well as 7 7.1 and 8. I am wondering if the installer can only see three versions of jaws at once. 
Gord
----- Original Message ----- From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx> 
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Sunday, April 29, 2007 6:52 PM
Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2


Hey Gord!
That's pretty much what I'm doing now.
It's not really a big deal as I am using sonar 6.2 for J Sonar 5.
But, I'm still puzzled as to why I can't reinstall CT 5 in Jaws 6.2 because that's where it was before I unstalled it? Surely at some point the installer could see Jaws 6.2 and it doesn't no more. 
Go figure?

Jean

Please visit my site at http://www.studiomontebello.com
You can also visit my girlfriend's art gallery at http://www.marie-helenemasse.com
----- Original Message ----- From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx> 
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Sunday, April 29, 2007 6:36 PM
Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2



Jean:
If you have three versions of jaws on your system, why not use one for ct6, 
one for jSonar, and the other for ct5?  You could run ct5 under jaws 7 for
example.
Gord
----- Original Message ----- From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx> 
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Friday, April 27, 2007 4:48 PM
Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2


Hey George!
Sorry about the confusion but all I want to do is to be able to install the 
CT 5.3 scripts on Jaws 6.2 as they were before I unstalled them.
I have Sonar 6 installed with the appropriate scripts but am not willing to 
work with it for now. I'm only experimenting with sonar 6 for the time
being!
And, my jaws 8,7.1 and 7.0 are all taken by Sonar 6 and the scripts, both CT 
and J Sonar.
Jean

Please visit my site at http://www.studiomontebello.com
You can also visit my girlfriend's art gallery at
http://www.marie-helenemasse.com
----- Original Message ----- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx> 
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Friday, April 27, 2007 2:42 PM
Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2


Hi Jean,

(Your message only got through because I manually approved
it - and then changed the format to plain text to remove the
graphics)

I'm getting a bit confused here.

What version of CakeTalking for Sonar do you actually want
to run?

If you already have the latest Sonar 6.#, I would suggest
you stay with that, CakeTalking for Sonar 6.#, and JAWS 8.#.

It is much easier to support the newest versions.

George.

-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Studio
Montebello
Sent: 27 April 2007 17:22
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2

Hey George!
OK for the graphics, but this one seems to have gotten thru?
I need to install CT 3 5.2 or 5.3  on Jaws 6.2 because I'm
already using Jaws 7.0, 7.1 and 8.0 for Sonar 6 with CT 6
and J Sonar 6.
At the moment, I'm using CT 5.3 with Jaws 8.0 but I want to
free it up for Sonar 6.2.
When I installed Jaws 8 on my machine, I uninstalled CT 5.3
from Jaws 6.2 to put it on Jaws 8 and since then, I am no
longer able to reinstall it to Jaws 6.2!
It worked really well with Jaws 6.2 and I guess I should
have let it alone.<grin>!!!
So, that's the deal!
Jean

Please visit my site at http://www.studiomontebello.com
You can also visit my girlfriend's art gallery at
http://www.marie-helenemasse.com
----- Original Message ----- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx> 
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Friday, April 27, 2007 11:18 AM
Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2


Hi Jean,

I suspect the reason you didn't get an answer before was
that your message was rejected due to the list message size
limitation of 20k.  Your graphics alone come to 27k.

I know you should technically be able to have JAWS 6.2
running, but 7.0 or 7.1 is recommended by Dancing Dots. (See
http://www.dancingdots.com/support/supportcaketalking5.htm
for details)

Can you also check the version of CakeTalking?  You should
have 5.2.

George.



-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Studio
Montebello
Sent: 27 April 2007 15:47
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Installation of CT 5.3 on Jaws 6.2



Hello Everyone!
I have asked this question before but have never got an
answer!
I need to install CT 5.3 on Jaws 6.2 but the install doesn't
show it in the list box.
Only Jaws 8, 7.1 and 7.0 appear.
I have repaired Jaws 6.2 but it still doesnt show.
I really need to do this and would appreciate support on
this matter.
Best regards,
Jean

Please visit my site at http://www.studiomontebello.com
You can also visit my girlfriend's art gallery at
http://www.marie-helenemasse.com

** To leave the list, click on the immediately-following
link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following
link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: