[ddots-l] Re: Hardware / Soundcard problem pls. help!

Hi there your problem may be that that sound card has been installed but that the dealer didn't install the drivers correctly.
Asuming you have configured your system properly, The first thing to do is the following
1. open up the start menu by pressing the windows key or control plus escape,
2. hit s until you hear Jaws say Settings,
3. you should have the control panel highlighted, just press enter on this item,
4. press s until you hear Jaws say system, and hit enter,
5. press control tab until you hear Jaws say the system page,
6. tab until you hear Jaws say Device manager, and hit the space bar to select this option,
7. you should see a list of system items at this point, arrow down until you hear Jaws say Other devices, and hit the right arrow to expand this tree view,
8. if you hear the that emu card is there simply delete this item, and restart your system, and have your drivers disk ready to re install the card,
9. at this point when your system has been restarted, insert the Drivers cd, and when the hardware wizard comes up, follow the prompts to re install the card, and you should be set at this point.
If all failes, then you may have a IRQ issue where the Realtech is conflicting with your high end sound card, if this is the case, I would get your self a sound blaster livee card, and install it along with your high end sound card. I have had instances where this was the case with the Realtech cards.
Hope this info helps.

----- Original Message ----- From: "Kylee Maloney" <kylee@xxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Thursday, June 22, 2006 2:20 AM
Subject: [ddots-l] Re: Hardware / Soundcard problem pls. help!


Hi, Patrick

I think that someone has to enable the onboard sound card from the bios
level. Not sure what that means, but technicians seem to know what that's
all about, and I'm sure someone far more knowledgeable than I could explain
it far better.

HTH

Kylee
----- Original Message ----- From: "Patrick Schuppe" <p.schuppe@xxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Thursday, June 22, 2006 5:11 PM
Subject: [ddots-l] Hardware / Soundcard problem pls. help!


Hello all together,

I have an very technical problem here. I think that may be noone can help
me 
here but because I think that everyone who can not order an accessible
dancingdots workstation for what ever reson may run into that same
problem. 
That's why I post this and hopefuly to get an solution.

The wole problem is about adding an sekend soundcard to the system I mean
an 
highend soundcard for Music produktion for Sonar.

Please also see an description of Hardware used in my system below.

I have 2 Soundcards here that I need to use. The lo end card is an
"Realtek 
AC.97 Audio"onboard soundcard. The 2th is an Emu 18 20 M. Both cards have
been installed by my dealer but onestly I do not think if he has checked
the
highend card if it works proberly. So I got the system; installed Jaws and
in the controlpanel there is only showing the Realtek soundcard and not
the 
Emu 18 20 M.

What I found out after talking with a lot support people is that Windows
is 
not supporting multiply Soundcards. But I know that there must be a way
because the Dancingdots systems have 2. I need this 2 cards because one
for 
Jaws talking output and the other for the music thinks. So the first
question is how that works that I can have this 2 cards working?

Do I need an other highend soundcard as the Emu?

By talking to a few support people here in Germany I also found out that
the
Onboard soundcard can not run with an 2th sound card. I do not know if
this 
is true but it has given me an other idear here: What if I disable the
Onboard sound in the Bios and after that install the Emu card again and
for
the Jaws talking I connect an USB-head set that I have here. That may be
the
solution I think. What do you all think and know about such solutions and
problems? I think everyone runs into that same problem because we all need
an 2th sound card for the Jaws talking.

I need your help / comments / suggestions and if an technical person reads
this then an technical atvice please:-)



Here is my Soft and hardware configuration:



Prozessor:

   Intel Pentium-D 930

 Ram:

   1 module RAM DDR2 533 1024MB Aeneon

 Mainboard:

   Asus P5ND2-SLI Revision 1.03

 Grafik:

   XFX Geforce 6200 128MB PCI-Express

Onboard Soundcard: Realtek AC.97 Audio

 Hard drive:

   Samsung SP0822N 80GB 7200 U/min IDE

 Cd/DVD Player / burner:

   DVD RW burner Philips SPD2400L1

Highend soundcard: Emu 18 20 M

 Box to change hard drives:

   ICY Dock IB-128SK-B SATA

 Tower:

   Delux MG420

 Kayboard:

   Cherry G81-3000LPNEU-D Layout

 Software:

   Microsoft Windows XP Professional

   Including service pack 2, Multilanguage-Edition



Jaws 7.0

Sonar 5.0

Caketalking scripts for Sonar 5.0 (CT5.0.16)



Ofcorse because the Soundcards are not working probperly I have not
installed any components of Sonar or Caketalking yet.

I hope this mailing helps other blind people as well.



Best regards from Germany,

Patrick Schuppe

 Germany



----------------------------------------------------------------------------
----


No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.9.2/370 - Release Date: 20/06/2006

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: