It works on all flavours of PC/Mac. Regards, Phil Muir Accessibility Training Telephone: US (615) 713-2021 UK +44-1747-821-794 Mobile: UK +44-7968-136-246 E-mail: info@xxxxxxxxxxxxxxxxxxxxxxxxxxx URL: http://www.accessibilitytraining.co.uk/ -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Michael C Sent: 26 January 2011 03:44 To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Focusrite safire 6 problems Hey Phil do you know if the Saafire pro works with Windows 7in both 64bit, and 32 bit, and on the Mac? There's also another Safire pro which is slightly smaller, will this work with your HSC sets? ----Original Message----- From: Phil Muir Sent: Tuesday, January 25, 2011 6:53 AM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Focusrite safire 6 problems Mike. We have a semi developped .HSC set for the control panel. This will give us control of the hardware monitoring once I have added a few more features. Am planning to do some more work on that today. Regards, Phil Muir Accessibility Training Telephone: US (615) 713-2021 UK +44-1747-821-794 Mobile: UK +44-7968-136-246 E-mail: info@xxxxxxxxxxxxxxxxxxxxxxxxxxx URL: http://www.accessibilitytraining.co.uk/ -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Michael C Sent: 25 January 2011 05:09 To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Focusrite safire 6 problems Hey Phil I was thinking of getting the safire pro 40, Have you noticed any accessibility issues in the control panel of the card, or am I still going to have to control the volume,and input monitoring in Sonar? -----Original Message----- From: Phil Muir Sent: Monday, January 24, 2011 5:25 AM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Focusrite safire 6 problems BTW Neville, the electric and Acoustic guitars that I recorded for you're tracks were tracked through the Focusrite Octopre. Regards, Phil Muir Accessibility Training Telephone: US (615) 713-2021 UK +44-1747-821-794 Mobile: UK +44-7968-136-246 E-mail: info@xxxxxxxxxxxxxxxxxxxxxxxxxxx URL: http://www.accessibilitytraining.co.uk/ -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of neville Sent: 24 January 2011 00:13 To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Focusrite safire 6 problems Hey Phil what is the name or model of the focusrite pre-amp you have? I am thinking about getting one. I'm not sure the audio Tampa I have is doing my voice justice. Any recommendations? May the peace of God which passes all understanding guard your heart and mind in Christ Jesus. God bless you! Music soft sacred and soulful Website http://www.nevillepeter.com email neville@xxxxxxxxxxxxxxxx phone 407-222-4488 -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Phil Muir Sent: Sunday, January 23, 2011 6:48 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Focusrite safire 6 problems I would switch to using ASIO drivers as they are generally the best option at the moment for Focusrite gear. Not personally recommending this interface as it's USB 1.1 which is not good for recording audio and softsynthes with a high track count. Shame really as you can do a lot with all of the hardware switches on the box E.G, turn a stereo source to mono etc. Anyway, getting back to USB1.1, From the manual: "Whilst Saffire 6 USB is a USB 1.1 device, the USB connection will work with any USB 1.1 or USB 2.0 compliant connector on your computer." Regards, Phil Muir Accessibility Training Telephone: US (615) 713-2021 UK +44-1747-821-794 Mobile: UK +44-7968-136-246 E-mail: info@xxxxxxxxxxxxxxxxxxxxxxxxxxx URL: http://www.accessibilitytraining.co.uk/ -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Nickus de Vos Sent: 22 January 2011 14:46 To: Dancing dots Subject: [ddots-l] Focusrite safire 6 problems Hi all, i just got my focusrite safire 6, i installed the drivers, plugged it in and opend sonar. When i plug in a mic and get level it sounds as if it's distorting and there's a slight delay, this happens at about -5 dB SO I'M NOT TOO LOUD. I prosume it's a latency problem and i have no clue to fix it, firstly in audio options at driver mode, which is best to select, wasapi, wdm/ks, asio or mme 32 bit? Then the playback and record buffers are set to 256, on the general tab it's set to 16 bit 44.1 KHz, buffers in playback q is on 2 and buffer size is 5%. I would appriciate any help when it comes to drivers, buffers and latency i'm a nobody., PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=subscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject?q or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq