Hi Nickus, Do you want to send various instruments to different buses?1: First go in to your busses by holding down shift and press arrow down, now name each bus track you need, 2: if you need extra busses, press Alt I to put you in insert and down arrow until you here "Stereo Bus" now press enter and another bus will have been added. 3: to send to a bus, first go back to the track pain by holding down shift and press up arrow, now go to the track you want and move across your columns in the track pain until you here bus column, press enter on this and down arrow until you hear the bus name you wish to send too then press enter again. 4: the busses themselves have a bus column so you can send busses through other busses. All busses except the master bus are set to the master bus by default. The master bus will be set to your sound card outs. This also can be changed which is useful if your sound card has more than just a left and right out.
Hope this helps. Steve W----- Original Message ----- From: "Nickus de Vos" <bigboy529@xxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx> Sent: Tuesday, January 25, 2011 7:54 AM Subject: [ddots-l] Re: Focusrite safire 6 problemsGuys how do you set up a send in sonar, e.g. If you want to send part of a signal to a bus, it's set up on the normal tracj template but i want to know how to do it myself.
-original message- Subject: [ddots-l] Re: Focusrite safire 6 problems From: Michael C <m_dsmusic@xxxxxxxxxxxx> Date: 25/01/2011 07:11 infact all sound card manufactures recommend ASIO. Even the Roland UA 1010 audio capture which I have is operating under Asio.------Original Message----- From: Tim Burgess
Sent: Monday, January 24, 2011 4:10 AM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Focusrite safire 6 problems Focusrite tech support recommend ASIO as a default. Best wishes. Tim Burgess Raised Bar Ltd Phone: +44 (0)1827 719822 Don't forget to vote for improved access to music and music technology at http://www.raisedbar.net/petition.htm -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of D!J!X! Sent: 24 January 2011 03:28 To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Focusrite safire 6 problems Is this the case for all saffires? THX, D!J!X! -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Phil Muir Sent: Sunday, January 23, 2011 6:48 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Focusrite safire 6 problems I would switch to using ASIO drivers as they are generally the best option at the moment for Focusrite gear. Not personally recommending this interface as it's USB 1.1 which is not good for recording audio and softsynthes with a high track count. Shame really as you can do a lot with all of the hardware switches on the box E.G, turn a stereo source to mono etc. Anyway, getting back to USB1.1, From the manual: "Whilst Saffire 6 USB is a USB 1.1 device, the USB connection will work with any USB 1.1 or USB 2.0 compliant connector on your computer." Regards, Phil Muir Accessibility Training Telephone: US (615) 713-2021 UK +44-1747-821-794 Mobile: UK +44-7968-136-246 E-mail: info@xxxxxxxxxxxxxxxxxxxxxxxxxxx URL: http://www.accessibilitytraining.co.uk/ -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Nickus de Vos Sent: 22 January 2011 14:46 To: Dancing dots Subject: [ddots-l] Focusrite safire 6 problems Hi all, i just got my focusrite safire 6, i installed the drivers, plugged it in and opend sonar. When i plug in a mic and get level it sounds as if it's distorting and there's a slight delay, this happens at about -5 dB SO I'M NOT TOO LOUD. I prosume it's a latency problem and i have no clue to fix it, firstly in audio options at driver mode, which is best to select, wasapi, wdm/ks, asio or mme 32 bit? Then the playback and record buffers are set to 256, on the general tab it's set to 16 bit 44.1 KHz, buffers in playback q is on 2 and buffer size is 5%. I would appriciate any help when it comes to drivers, buffers and latency i'm a nobody., PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=subscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject?q or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=subscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq__________ Information from ESET NOD32 Antivirus, version of virus signature database 5815 (20110125) __________
The message was checked by ESET NOD32 Antivirus. http://www.eset.com __________ Information from ESET NOD32 Antivirus, version of virus signature database 5815 (20110125) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribeFor other list commands such as vacation mode, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq orsend a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type faq