[ddots-l] Re: FW 1884 question

Neville wrote: Maybe I asked the question wrong. I was asking about the FW1884. 
I thought
the manual said that the EQ had to be in the affects bin in order for the Q
frequency and gain nobs on the Taskam to work.

Phil replied: all of the instructions with regard to using the EQ in the FW1884 
are totally out of 
date.  They were written for Sonar 2.2 and things have somewhat altered with 
regard to accessing the 
EQ on the FW1884 since then.  speaking of which, here's another nugget for you. 
 To move between 
control in the track and bus view: do the following:

To move the FW1884 into the buss view so that you can control EQ, pans and buss 
output levels ec, 
pres set and bank right.  To move back to the track view to control EQ etc, 
press the key 
combination Set and bank left.  Note: remember that in order to use the EQ in 
the buss view, you 
will have to press one of the select buttons for the buss in question.  Also, 
if you have more than 
8 busses then, you will need to press the bank right key, in order to get to 
those busses.

Regards, Phil Muir
P J Muir Productions
Music And Audio Production
URL:
www.philmuir.com/
----- Original Message ----- 
From: "neville" <neville@xxxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, January 30, 2008 3:41 PM
Subject: [ddots-l] Re: FW 1884 question


> Maybe I asked the question wrong. I was asking about the FW1884. I thought 
> the manual said that 
> the EQ had to be in the affects bin in order for the Q frequency and gain 
> nobs on the Taskam to 
> work.
> ----- Original Message ----- 
> From: "Phil Muir" <ddots@xxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Wednesday, January 30, 2008 2:07 AM
> Subject: [ddots-l] Re: FW 1884 question
>
>
>> Neville wrote: Does the EQ have to be in the affects bin for it to work?
>>
>> Phil replied: no.  When using the EQ with the FW1884, you always use the EQ 
>> in the track 
>> inspector. That's why your able to enable the EQ and individual bands for 
>> the EQ on a track/buss 
>> without opening the property sheet for the EQ.
>>
>> Regards, Phil Muir
>> P J Muir Productions
>> Music And Audio Production
>> URL:
>> www.philmuir.com/
>> ----- Original Message ----- 
>> From: "neville" <neville@xxxxxxxxxxxxxxxx>
>> To: <ddots-l@xxxxxxxxxxxxx>
>> Sent: Wednesday, January 30, 2008 4:00 AM
>> Subject: [ddots-l] Re: FW 1884 question
>>
>>
>>> Does the EQ have to be in the afects bin for it to work?
>>> ----- Original Message ----- 
>>> From: "Phil Muir" <ddots@xxxxxxxxxxxx>
>>> To: <ddots-l@xxxxxxxxxxxxx>
>>> Sent: Monday, January 28, 2008 5:52 PM
>>> Subject: [ddots-l] Re: FW 1884 question
>>>
>>>
>>>> GF wrote: How am I supposed to use the 4-band eq with the Tascam FW1884? I 
>>>> put the fx
>>>> eq on a track like it said, I don't know what I am doing after that. I
>>>> thought it was just supposed to work
>>>>
>>>> Phil replied: which version of Sonar are you using.  The instructions for 
>>>> setting up the FW1884 
>>>> are way out of date.  In order to use the EQ, if your working in any 
>>>> version of Sonar above 2.2 
>>>> then, you would use the Sonitus Track EQ.  If your using Sonar 6 and 
>>>> beyond, shoot me a private 
>>>> E-mail and I will send you on the latest control surface .dll for the 
>>>> FW1884.  If your working 
>>>> in Sonar 3 and beyond, then, do the following.
>>>>
>>>> 1: go to the track where you wish to use the EQ.
>>>>
>>>> 2: press the select button on the FW1884 for that track.
>>>>
>>>> 3: use the key combination Control Shift and one of the band buttons on 
>>>> the FW1884 to turn the 
>>>> EQ on for that track.
>>>>
>>>> 4: in order to activate one of the band buttons, press the key combination 
>>>> Shift and one of the 
>>>> band buttons on the FW1884.
>>>>
>>>> 5: now feel free to use the gain, freq and Q buttons on the FW1884 to 
>>>> manipulate the EQ.
>>>>
>>>>
>>>> GF wrote: Please let me know what I am missing, or if this is even the 
>>>> list to ask
>>>> this on. I am also posting this on another list as well.
>>>>
>>>> Phil replied: Hopefully that's covered everything.
>>>>
>>>> GF wrote: Thanks for any help.
>>>>
>>>> Phil replied: your welcome!
>>>>
>>>> Regards, Phil Muir
>>>> P J Muir Productions
>>>> Music And Audio Production
>>>> URL:
>>>> www.philmuir.com/
>>>> ----- Original Message ----- 
>>>> From: "Clarence Griffin" <goldfingas@xxxxxxx>
>>>> To: <ddots-l@xxxxxxxxxxxxx>
>>>> Cc: <midimag@xxxxxxxxxxx>
>>>> Sent: Monday, January 28, 2008 10:04 PM
>>>> Subject: [ddots-l] FW 1884 question
>>>>
>>>>
>>>>> How am I supposed to use the 4-band eq with the Tascam FW1884? I put the 
>>>>> fx
>>>>> eq on a track like it said, I don't know what I am doing after that. I
>>>>> thought it was just supposed to work
>>>>> Please let me know what I am missing, or if this is even the list to ask
>>>>> this on. I am also posting this on another list as well.
>>>>> Thanks for any help.
>>>>>
>>>>> GF
>>>>> http://www.goldfingas.com
>>>>>
>>>>> Check out the block party every Thursday on The Beyond Radio Network
>>>>> http://www.tbrn.net
>>>>>
>>>>> for winamp ogg stream:
>>>>> http://tbrn.net:8888/tbrn.ogg
>>>>>
>>>>>
>>>>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>>>>> To leave the list, click on the immediately following link:
>>>>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>>>>> If this link doesn't work then send a message to:
>>>>> ddots-l-request@xxxxxxxxxxxxx
>>>>> and in the Subject line type
>>>>> unsubscribe
>>>>> For other list commands such as vacation mode,
>>>>> click on the immediately following link:
>>>>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
>>>>> send a message, to
>>>>> ddots-l-request@xxxxxxxxxxxxx
>>>>> and in the Subject line type
>>>>> faq
>>>>>
>>>>
>>>>
>>>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>>>> To leave the list, click on the immediately following link:
>>>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>>>> If this link doesn't work then send a message to:
>>>> ddots-l-request@xxxxxxxxxxxxx
>>>> and in the Subject line type
>>>> unsubscribe
>>>> For other list commands such as vacation mode, click on the immediately 
>>>> following link:
>>>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
>>>> send a message, to ddots-l-request@xxxxxxxxxxxxx
>>>> and in the Subject line type
>>>> faq
>>>>
>>>>
>>>>
>>>>
>>>> -- 
>>>> No virus found in this incoming message.
>>>> Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 
>>>> 269.19.15/1249 - Release Date: 
>>>> 1/29/2008 9:51 AM
>>>>
>>>>
>>>
>>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>>> To leave the list, click on the immediately following link:
>>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>>> If this link doesn't work then send a message to:
>>> ddots-l-request@xxxxxxxxxxxxx
>>> and in the Subject line type
>>> unsubscribe
>>> For other list commands such as vacation mode, click on the immediately 
>>> following link:
>>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
>>> send a message, to ddots-l-request@xxxxxxxxxxxxx
>>> and in the Subject line type
>>> faq
>>>
>>
>>
>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode, click on the immediately 
>> following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
>> send a message, to ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> faq
>>
>>
>>
>>
>> -- 
>> No virus found in this incoming message.
>> Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 
>> 269.19.16/1251 - Release Date: 
>> 1/30/2008 9:29 AM
>>
>>
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode, click on the immediately 
> following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
> 


PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, 
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to 
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq

Other related posts: