[ddots-l] Re: FW 1884 question

Maybe I asked the question wrong. I was asking about the FW1884. I thought the manual said that the EQ had to be in the affects bin in order for the Q frequency and gain nobs on the Taskam to work. ----- Original Message ----- From: "Phil Muir" <ddots@xxxxxxxxxxxx> 
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, January 30, 2008 2:07 AM
Subject: [ddots-l] Re: FW 1884 question



Neville wrote: Does the EQ have to be in the affects bin for it to work?
Phil replied: no. When using the EQ with the FW1884, you always use the EQ in the track inspector. That's why your able to enable the EQ and individual bands for the EQ on a track/buss without opening the property sheet for the EQ. 

Regards, Phil Muir
P J Muir Productions
Music And Audio Production
URL:
www.philmuir.com/
----- Original Message ----- From: "neville" <neville@xxxxxxxxxxxxxxxx> 
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, January 30, 2008 4:00 AM
Subject: [ddots-l] Re: FW 1884 question



Does the EQ have to be in the afects bin for it to work?
----- Original Message ----- From: "Phil Muir" <ddots@xxxxxxxxxxxx> 
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Monday, January 28, 2008 5:52 PM
Subject: [ddots-l] Re: FW 1884 question
GF wrote: How am I supposed to use the 4-band eq with the Tascam FW1884? I put the fx 
eq on a track like it said, I don't know what I am doing after that. I
thought it was just supposed to work
Phil replied: which version of Sonar are you using. The instructions for setting up the FW1884 are way out of date. In order to use the EQ, if your working in any version of Sonar above 2.2 then, you would use the Sonitus Track EQ. If your using Sonar 6 and beyond, shoot me a private E-mail and I will send you on the latest control surface .dll for the FW1884. If your working in Sonar 3 and beyond, then, do the following. 

1: go to the track where you wish to use the EQ.

2: press the select button on the FW1884 for that track.
3: use the key combination Control Shift and one of the band buttons on the FW1884 to turn the EQ on for that track.
4: in order to activate one of the band buttons, press the key combination Shift and one of the band buttons on the FW1884.
5: now feel free to use the gain, freq and Q buttons on the FW1884 to manipulate the EQ.
GF wrote: Please let me know what I am missing, or if this is even the list to ask 
this on. I am also posting this on another list as well.

Phil replied: Hopefully that's covered everything.

GF wrote: Thanks for any help.

Phil replied: your welcome!

Regards, Phil Muir
P J Muir Productions
Music And Audio Production
URL:
www.philmuir.com/
----- Original Message ----- From: "Clarence Griffin" <goldfingas@xxxxxxx> 
To: <ddots-l@xxxxxxxxxxxxx>
Cc: <midimag@xxxxxxxxxxx>
Sent: Monday, January 28, 2008 10:04 PM
Subject: [ddots-l] FW 1884 question
How am I supposed to use the 4-band eq with the Tascam FW1884? I put the fx 
eq on a track like it said, I don't know what I am doing after that. I
thought it was just supposed to work
Please let me know what I am missing, or if this is even the list to ask 
this on. I am also posting this on another list as well.
Thanks for any help.

GF
http://www.goldfingas.com

Check out the block party every Thursday on The Beyond Radio Network
http://www.tbrn.net

for winamp ogg stream:
http://tbrn.net:8888/tbrn.ogg


PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq




PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately following link: 
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq




--
No virus found in this incoming message.
Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.19.15/1249 - Release Date: 1/29/2008 9:51 AM 




PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately following link: 
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq




PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately following link: 
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq




--
No virus found in this incoming message.
Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.19.16/1251 - Release Date: 1/30/2008 9:29 AM 




PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately following link: 
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to ddots-l-request@xxxxxxxxxxxxx 
and in the Subject line type
faq

Other related posts: