[ddots-l] Re: Edirol FA66 recording problems

Hi,

You should have the outputs set to something like "edirol fa66 line 12 mic in 
left" or something along those lines. Also, do you have the sampling rate 
switch on the card set to 44.1 khz?

Omar Binno

www.omarbinno.com
  ----- Original Message ----- 
  From: Roberto Gonzalez 
  To: ddots-l@xxxxxxxxxxxxx 
  Sent: Friday, December 28, 2007 1:59 PM
  Subject: [ddots-l] Edirol FA66 recording problems


  Hello,

  When I record audio tracks with either a mic or electric guitar the audio 
playback is horrible.  It's very choppy with constant clicking, out of phase 
with respect to the metronome and I only hear audio in one channel.  When ai 
monitor with headphones while recording it sounds reasonably crisp and I can 
hear it in both ears.

  I've tried increasing the I/O buffer from 128 to 256 and finally to 512 but 
it makes no difference.

  Indicative of possibly the same problem is that I have my input gain nearly 
maxed out while I record but I still hear the clicking and single-channel 
phenomena during playback even when I turn the gain way down during recording.

  I did have some trouble getting the Edirol configured with Sonar using the 
Wave Profiler.  After about a dozen attempts it finally just started working 
and not complaining about driver incompatibility or being used by another 
program.  So I'm wondering if someone can give me a checklist of Sonar 6 audio 
settings, especially pertaining to the Edirol FA66?  Thanks in advance.

  -Roberto

Other related posts: