[ddots-l] Re: Changing Real Time Effects Parameters in the Track Inspector
- From: "Phil Muir" <info@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sat, 27 Nov 2010 11:43:01 -0000
Well, if you're seeing the names on those controls then, it's possible that
they are automatable. Try changing values when focussed over those names
and see what happens. It's also possible that you are encountering the good
old CWACCESS Window not refreshing bug.
Regards, Phil Muir
Accessibility Training
Telephone: US (615) 713-2021
UK +44-1747-821-794
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxxxxxxxxxxxxxxxxx
URL:
http://www.accessibilitytraining.co.uk/
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Justin Kauflin
Sent: 27 November 2010 00:03
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Changing Real Time Effects Parameters in the Track
Inspector
Yes, I made sure that show assignable controls was checked. Everything is
visible. I can see the EQ parameters, and the generic controller
parameters. The ones that are specific to the plug in just say the name.
No values to change.
For one glorious moment, I was able to see them. I was in 32 bit Sonar and
had inserted the effect in the master bus. When I went to the inspector,
they were visible, and I was able to change the percentage of each effect
that was related to the plug in, like attack, release, and compression.
When I left the inspector and went back in, they were just the names of the
parameter again with nothing to change. A bit inconsistent, but that's what
I saw. After that one time, I've not been able to get the numbers back.
Justin
On Nov 26, 2010, at 7:05 AM, Phil Muir wrote:
> Could you not see any parameters in the track inspector at all? Did
> you enable the "Show Assignable Controls" option?
>
>
>
>
> Regards, Phil Muir
> Accessibility Training
> Telephone: US (615) 713-2021
> UK +44-1747-821-794
> Mobile: UK +44-7968-136-246
> E-mail:
> info@xxxxxxxxxxxxxxxxxxxxxxxxxxx
> URL:
> http://www.accessibilitytraining.co.uk/
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx
> [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Chris Smart
> Sent: 25 November 2010 17:37
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: Changing Real Time Effects Parameters in the
> Track Inspector
>
> At 12:54 AM 11/25/2010, you wrote:
>> I'm actually checking out one of the Waves plugs, V Comp. I see the
>> name of the parameter, but no numbers are associated, and none of the
>> value change keys do anything.
>
> Interesting. I just tried both V-comp and R-comp, and nothing. NOt
> even any changes when arrowing through presets.
>
> I was trying a let's say shady older copy of version 5 though.
>
> Chris
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode, click on the
> immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode, click on the
> immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>
>
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subjectzq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
