[ddots-l] Re: CT5 and Sib Speaking on the same machine

Can you run both apps side by side or does this only work if you run one at a time?

CWPA9 wow!

Cheers, Dan
----- Original Message ----- From: "Dave Carlson" <dgcarlson@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Monday, July 17, 2006 7:00 AM
Subject: [ddots-l] Re: CT5 and Sib Speaking on the same machine



K,

I've got the old CWPA9 and Sibelius. CWPA9 requires 800x600 with 16M colors,
JAWS 4.5.


Sibelius requires 1024-768 with 16 Million colors and JAWS 5.1 (I keep it
simple)

I run my machine at 800x600 with JAWS 7.0, 16 million colors.

My batch files use jstop.exe to change the JAWS version and Multires with
parameters to change the resolutions as required before and after launching
either CWPA9 or Sibelius. Works flawlessly.


Dave
I'll send you my batch files if you'd like to see how it's done.

Dave

----- Original Message ----- From: "Kevin L. Gibbs" <kevjazz@xxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: July 15, 2006 11:39 PM
Subject: [ddots-l] Re: CT5 and Sib Speaking on the same machine





-----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Carlson Sent: Saturday, July 15, 2006 10:28 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: CT5 and Sib Speaking on the same machine


Dan,Dave, Do you have Sonar 5 and CT5 and Sib on one box? I've heard of multi-rez over the years but didn't realize it would work here. I reboot every time and, while it works, it is a bit of a pain. K.

Simpler than that. Go to the Dancing Dots Web site and look for
information on how to run Caketalking and Sibelius on the same machine.
If you use the Multires program as described you can set up batch files
that will automatically change your screen attributes prior to launching
either CT or Sibelius. In fact I use these batch files to not only
change the screen resolution but also to launch the version of JAWS that
is most appropriate.

No need to go through the pain of setting up profiles and re-booting.

Dave

----- Original Message ----- From: "Dan Rugman" <danrugman@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: July 14, 2006 6:00 PM
Subject: [ddots-l] Re: CT5 and Sib Speaking on the same machine



MessageYou have an interesting definition of what doesn't constitute a
problem. *lol*
----- Original Message ----- From: Kevin L. Gibbs
To: ddots-l@xxxxxxxxxxxxx
Sent: Friday, July 14, 2006 6:23 PM
Subject: [ddots-l] Re: CT5 and Sib Speaking on the same machine



No. You just have to reset the color and reboot each time you switch apps. K. -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Dan Rugman Sent: Friday, July 14, 2006 9:33 AM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] CT5 and Sib Speaking on the same machine


I don't have CT 5 yet but I'm assuming from the posts recently that it needs the display to be set to 32 bit colour. Sibelius Speaking, on the other hand, is still running with 16 bit colour. Is this going to cause a problem for those running both scripts?

   Dan


** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq


Other related posts: