[ddots-l] Re: Bank/Patch Changes Not Matching Up

Thank you for the tips.  I'm already headed off in that direction.  Smiles.

Kind Regards,
Kim Ellsworth 

-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Omar Binno
Sent: Monday, October 02, 2006 9:17 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Bank/Patch Changes Not Matching Up

You might want to find a Triton user Forum and contacting them about the
problem. If you explain to them that you're blind, the users on there are
usually pretty helpful about giving detailed responses. You could also try
contacting the cakewalk user forum with your problem as well.

Omar Binno
----- Original Message -----
From: "Kim Ellsworth" <jbkim72@xxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Monday, October 02, 2006 7:34 AM
Subject: [ddots-l] Re: Bank/Patch Changes Not Matching Up


> Hi Tim,
>
> Thanks for writing and for trying to help.   It is an exact match for the
> Triton Extreme found at the Korg forum site.  There were actually two
> different .INS files there for the Triton Extreme, one was minus the drum
> kits.  I have even looked through the .INS file in Notepad and the
> instruments do match up.
>
> I am sure this must be something simple that I just haven't hit on yet and
> hopefully someone can help me get to the bottom of it.  If you or anyone 
> has
> any further questions please let me know.  Thanks again to everyone who is
> trying to help here.
>
> With her fingers crossed,
> Kim Ellsworth
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] 
> On
> Behalf Of Tim Burgess
> Sent: Monday, October 02, 2006 3:36 AM
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: Bank/Patch Changes Not Matching Up
>
> Hi,
>
> Just checking - within the Korg.ins file, was there an exact match for 
> your
> synth or did you take an approximation?
>
> Best wishes.
>
> Tim Burgess
> Raised Bar Ltd
> Phone:  +44 (0)1827 719822
>
> Don't forget to vote for change at http://www.raisedbar.net/petition.htm
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] 
> On
> Behalf Of Kim Ellsworth
> Sent: 02 October 2006 00:30
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Bank/Patch Changes Not Matching Up
>
> Hi everyone,
>
> Please, please help me!  I no I almost have everything setup properly
> between my synthesizer (Korg Triton Extreme), my sound card (M-Audio Delta
> LT 1010) and my desktop computer.  I've read and read the Cake Talking
> tutorial on the subject of midi, hardware setup, etc. until I'm blue in 
> the
> face.  I'm so close, yet still so far from being able to start recording.
>
> Situation:
>
> 1. Currently, my Korg is connected to the desktop via two routes; via USB 
> to
> the computer(we were told to do this by the dealer where we bought the
> synthe) and by two midi cables (input and output of course that go 
> directly
> to the sound card).
>
> 2. Right now, until I can get a mixer, I have a set of monitor speakers to
> listen to the synthesizer through.
> 3. I am running Sonar 4, producer edition and Cake Talking 4.0.3.  OS on
> desktop machine is Windows XP Home, SP2.
>
> 4. I followed the instructions on configuring Sonar to recognize the Delta
> 1010, ran the Cake Talk tests at the beginning of this whole setup and
> everything was successful.
>
> 5. I imported the korg.ins file in the import instrument deffinitions 
> dialog
> and that appeared successfull as the patch names for the banks in the
> program and combi mode show up properly when choosing patch names. 
> However,
> when I cycle through the patch names after choosing a bank via Sonar, the
> sounds do change on the synthe side but it's not the correct patch; 
> rather,
> no matter what bank I choose and what patch I choose via sonar, it is only
> picking the synthesizer's general midi patch sounds and not the sounds 
> that
> are specific to the Korg.  Example, in Sonar, I choose Bank a, Patch name
> keyboard piano and strings.  This is a patch that on the actual 
> synthesizer
> does indeed belong to bank A.  Yet, the synthe switches to harpsichord
> instead.  Am I making sense?
>
> By the way, Local Mode is set to off, enable bank, program and combi 
> changes
> are all turned on.  I played around a bit with the input and output of 
> midi
> ports but currently I have the input set to the Delta and the output set 
> to
> USB audio device, which is how my Korg shows up in Sonar and in the midi
> devices in my sounds and audio properties of my computer.
>
> I apologize for making this a novel but trying to give as much information
> as possible that may be of some help and also, I've been working on trying
> to get this setup for a while now and a bit frustrated that I cannot 
> figure
> this thing out on my own.
>
> Kind Regards,
> Kim Ellsworth
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
> __________ NOD32 1.1786 (20061002) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.eset.com
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> 

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

__________ NOD32 1.1786 (20061002) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: