[ddots-l] Re: 0 dB or higher?

Thanx, that's cool, I'll be upgrading to v8 next week...

Mike
  ----- Original Message ----- 
  From: Phil Muir 
  To: ddots-l@xxxxxxxxxxxxx 
  Sent: Friday, February 20, 2009 3:21 PM
  Subject: [ddots-l] Re: 0 dB or higher?


  Mike.  Boostt 11 ships in any version of Sonar from 7 and beyond.

  Regards, Phil Muir
   
  P J Muir Productions,
  Music And Audio Production
  Telephone: US (615) 713-2021  
  UK+44-1747-821-794
  Mobile: UK +44-7968-136-246
  E-mail:
  info@xxxxxxxxxxxx
  URL:
  www.philmuir.com/ 
    ----- Original Message ----- 
    From: Mike Christer 
    To: ddots-l@xxxxxxxxxxxxx 
    Sent: Friday, February 20, 2009 1:45 PM
    Subject: [ddots-l] Re: 0 dB or higher?


    Cheers!


      ----- Original Message ----- 
      From: Omar Binno 
      To: ddots-l@xxxxxxxxxxxxx 
      Sent: Friday, February 20, 2009 1:28 PM
      Subject: [ddots-l] Re: 0 dB or higher?


      Here's the info.
      http://store.cakewalk.com/b2cus/ProductInfo.aspx?productid=10-CWBE1.00-20E


      Omar Binno

      AIM: LOD1116
      Skype: obinno1
      Website: www.omarbinno.com
        ----- Original Message ----- 
        From: Mike Christer 
        To: ddots-l@xxxxxxxxxxxxx 
        Sent: Friday, February 20, 2009 8:20 AM
        Subject: [ddots-l] Re: 0 dB or higher?


        Who makes Boost 11?

        Cheers

        Mike


          ----- Original Message ----- 
          From: Mike C 
          To: ddots-l@xxxxxxxxxxxxx 
          Sent: Friday, February 20, 2009 12:22 PM
          Subject: [ddots-l] Re: 0 dB or higher?


          hey there what you need to do is the following.  There is a plug in 
called Boost11
            you need to insert this as your master bus, and route all of your 
tracks to this.  In the boost11 plugin you will find several presets which you 
can adjust to make sure that your mix sounds great.  This is just one option 
you could do, the other is to normalize your mix by running it through sound 
forge.  However the boost11 plugin does work well for most mixes.  But in the 
long run you might be better off getting Soundforge to complete your final 
mixes.  Its not an expensive program, and is definatly worth it.
            ------ Original Message ----- 
            From: Stacy Blackwell 
            To: ddots-l@xxxxxxxxxxxxx 
            Sent: Thursday, February 19, 2009 11:23 PM
            Subject: [ddots-l] 0 dB or higher?


            Hello again.  My new question is that I have maxed the outputs of a 
project until it sounded balanced.  I pushed everything to the 0 dB output 
level.  I thought the mix was good, but when compared to a regular CD, the 
overall volume was a lot lower.  To match the volume, I had to max out some 
buses to 6 dB.  I shouldn't have to do this, should I?  I thought 0 dB was 
where the volume should be for a quality recording.  Are my original recording 
levels too low?  I don't think they were that far below 0 dB.  My MP3 
conversion was also quieter in volume.  Any suggestions?  S.B.    

--------------------------------------------------------------------
            Windows Live™: Keep your life in sync. Check it out. 

Other related posts: