[softwarelist] Re: Transloaders

In article <4e35bbc483Jeremy@xxxxxxxxxxxxxxxx>,
   Jeremy C B Nicoll <Jeremy@xxxxxxxxxxxxxxxx> wrote:
> In article <4e35aa4caddfs@xxxxxxxxxxxxx>,
>    Dave Symes <dfs@xxxxxxxxxxxxx> wrote:

> > I set this up on my machine as an obey file and tested it, it works as
> > expected.

> > Transferred to her machine and it doesn't work. (Obey and test/png
> > were in the same dir).

> That command:

> <ChangeFSI$Dir>.ChangeFSI <obey$dir>.test/png
>    <obey$dir>.test/spr 28r { > null: }

> generates some output which is written to "null:" ie just thrown away.
> If you change the command to, say:

> <ChangeFSI$Dir>.ChangeFSI <obey$dir>.test/png
>    <obey$dir>.test/spr 28r { > RAM::0.$.CFSIout }

> and inspect the output, is thre anything useful in it?

Thanks for that bit 'O info Jeremy.
I'll try that out on her machine later this evening when she's finished
her work.
I've just tried it on my machine and it doesn't produce anything much.

00000000 :   0016               : V0

And that's it.

On her machine it produced 00000000 :

Cheers
Dave S

--

Other related posts: