[softwarelist] Re: Transloaders

In message <4e32bfb075dfs@xxxxxxxxxxxxx>
          Dave Symes <dfs@xxxxxxxxxxxxx> wrote:

> On 06 Jun, dfs@xxxxxxxxxxxxx wrote:
>> On 06 Jun, dfs@xxxxxxxxxxxxx wrote:
> 
>> [Snip]
> 
>> > Okay. I've downloaded the above and it does work on my machine (I'm
>> > leaving hers until I'm sure mine is okay).
> 
>> > TransFSI or CFSI.  Be assured I mean your TransFSI.
> 
>> > The more recent versions of ChangeFSI come with the Select upgrades.
> 
>> > I'll send you the TransFSI that won't play the game to look at, though
>> > as far as I can see it's the same as the one I've just downloaded that
>> > does work.
> 
>> > Thanks for your help
>> > Cheers
>> > Dave S
> 
>> David, I've discovered another interesting problem... In that the new
>> downloaded version does and doesn't work ;-)
> 
>> I don't have time to test it out as unfortunately work, work, calls, but
>> I'll test and write up later.
> 
>> Cheers
>> Dave S
> 
> Okay, off we go again.
> 
> The Transnnn filters on this machine are run at Bootup, from !Boot,
> configuration, Boot, Run, Run at startup.  Which as I understand it, on
> the New Boot system is the correct place to put things, replacing the old
> Tasks Desktop boot file.
> 
> When run from there TransFSI doesn't work and thus the BMP or PNG file
> dropped into an OvPro frame don't display and error out.
> 
> If I now manually double click TransFSI the graphics will get translated
> and load into an OvPro frame.
> 
> I've changed the order of then in Run at startup to see if that made any
> difference, No change upon a machine reboot, as per usual... Message from
> Transloader, "File could not be converted".
> 
> I've put an entry in a Tasks Desktop Boot file to Run TransFSI, makes no
> difference, File could not be converted.
> 
> I've created a bog standard Obey file to Run TransFSI and put that in
> Tasks, as I understand it anything, like an Obey file in tasks will be
> automatically run during the Boot up process...
> 
> Well in this case it's not as TransFSI still doesn't do the business, if
> however I manually double click the Obey File, then TransFSI, BMP/PNG into
> OvPro frame works.
> 
> My knowledge has run out, time for others to comment.

I wonder whether ChangeFSI has to have been seen before TransFSI?

You could try putting that into Look At as well.


> 
> Summary:
> Any attempt to Auto Run TransFSI fails, but manually double clicking it,
> or an Obey File to run it works.
> 
> Cheers
> Dave S
> 


-- 
Alan Adams, from Northamptonshire
alan.adams@xxxxxxxxxxxxxxxxxxxxxxxxxxx
http://www.nckc.org.uk/

Other related posts: