[softwarelist] Re: "Save As" button in OPW 2.92 (17 August 06)

David Pilling wrote:
In message <4547A57D.2030408@xxxxxxxx>, Clive Bonsall <C.Bonsall@xxxxxxxx> writes
Here are the relevant lines from the two Macro files. Clearly, they're different, but then I've done several "saves" of the macro definitions since installing v2.92. Does this tell you anything? 

Both of them look to be correct.

C:\Program Files\DavidPilling\OvationPro\AutoRun

This is the default as supplied - notice it uses openfilesaveas() i.e. the correct OP Windows function.

C:\Documents and Settings\cbonsall\Application Data\DavidPilling\OvationPro\AutoRun

This is correct after you have applied the change to allow saving with a right click.

So with these two files in place do you still have a problem? If so the macros are being redefined somewhere else.

No ... the problem was solved when you provided the correct macro definitions for Windows. I was just curious to know how the RiscOS definitions had crept in there in the first place, since there should have been no legacy files on my hard drive from prevous installations of OPW (following the Windows reinstall, that is).

Of course, I do have VirtualRPC on the C_drive which has OP (RiscOS version) installed ... and which would have been reinstalled before I reinstalled OPW. But, surely, that couldn't have been the source of the RiscOS definitions for Save As and FileInfo in the OPW macro file, could it?
--
CB

Other related posts: