[softwarelist] Re: Ov Pro & Internal Error Type=3

In message <aad38f764f.rogerarm@xxxxxxxxxxxxxxxxxxx>
          Roger Darlington <rogerarm@xxxxxxxxxx> wrote:

> On 24 Feb 2008, charles wrote:
>> In article <88e32c764f.rogerarm@xxxxxxxxxxxxxxxxxxx>,
>>    Roger Darlington <rogerarm@xxxxxxxxxx> wrote:
>> 
>>> Hi David,
>> 
>>> I have Iyonix, RO 5.13, Ov Pro 2.77, Printers 1.72.
>> 
>>> I have an Ov Pro file, mae with OvPro 2.77, which it will not print,
>>> giving an error 'Ov Pro has suffered an internal error, type=3'.
>> 
>>> It does this if I try printing to PoScript, or my Canon Inkjet, so I
>>> don't think it is printer-driver related.
>> 
>>> Strangely enough, OvPro will print all the other files I have fed it.
>> 
>>> I have tried saving it out as a DDL file and re-loading it back into
>>> OvPro (after a re-boot) but it's always the same with this particular
>>> file: type=3 error.
>> 
>>> Any ideas?
>> 
>> 
>> have you a very large picture in it?  If so try proxying it.
>> 
> Apart from having no pictures at all, Another thing is that the error
> message varies between type=3 and type=5 depending upon its' own whim.

> I have even reduced the 56 page homerton/selwyn font document to just
> one line, and it still crashes with a type=3,or=5.

> Since it is now so small, I have attached it, but whether it gets
> through, or not, is a different matter...


Just to say I have printed it off without a problem except to tick the 
Fit box.

Cheers

Alan


-- 
To unsubscribe or subscribe goto: http://www.freelists.org/list/davidpilling

Other related posts: