[bvipilots] Re: Simple ATC

  • From: "Tony" <tonys_groups@xxxxxxxxxxxxxx>
  • To: <bvipilots@xxxxxxxxxxxxx>
  • Date: Fri, 30 Mar 2012 08:45:30 +0100

I'll assume that when you tried, IYP wasn't running, which points to an FSX
issue.

 

There are a few things to check in sound settings within FSX.

 

Is the volume for voice set at 100%?

 

Is voice set to use your computer's primary sound device by default?

 

T

From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@xxxxxxxxxxxxx]
On Behalf Of Adam 
Sent: 30 March 2012 01:42
To: bvipilots@xxxxxxxxxxxxx
Subject: [bvipilots] Re: Simple ATC

 

Ok tony I am going to say no I can't get atc  just on a dummy flight!  I
thought I did have it but no!  

 

 

 

Stealth

12844

Have a good Day!

 

From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@xxxxxxxxxxxxx]
On Behalf Of Tony
Sent: Thursday, March 29, 2012 6:36 PM
To: bvipilots@xxxxxxxxxxxxx
Subject: [bvipilots] Re: Simple ATC

 

First things first.

 

Load any old flight, i.e. a flight of your choosing.

 

Forget IYP at this point.

 

Hit the scroll lock until you hear the ATC menu pop up.

 

Now, press the number 1 a couple of times.

 

You should hear either local weather, or your pilot voice making demands of
ATC.

 

Let me know whether you hear anything.

 

T

 

From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@xxxxxxxxxxxxx]
On Behalf Of Adam 
Sent: 30 March 2012 00:31
To: bvipilots@xxxxxxxxxxxxx
Subject: [bvipilots] Re: Simple ATC

 

Tony I am still having the issues if you would like me to email you off list
any suggestions would help!  I am back at the drawing board for solutions so
anything could help!

Smile 

Thanks 

 

 

 

Stealth

12844

Have a good Day!

 

From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@xxxxxxxxxxxxx]
On Behalf Of Tony
Sent: Thursday, March 29, 2012 11:50 AM
To: bvipilots@xxxxxxxxxxxxx
Subject: [bvipilots] Re: Simple ATC

 

I had a similar issue, a while back, let me know if you're still not sorted,
there's a few things you could try.

 

T

 

From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@xxxxxxxxxxxxx]
On Behalf Of Robert Cezar
Sent: 29 March 2012 00:43
To: bvipilots@xxxxxxxxxxxxx
Subject: [bvipilots] Re: Simple ATC

 

Hi Adam,

 

As I recall from your previous participation in the Come Fly With Me
flights, you've always had a problem with ATC. So, I'll need to go through
this with you step-by-step to get this resolved. After we finish today's
Come Fly With Me flight, I'll be happy to work with you, if you have the
time.

 

Regards,

 

Robert  

 

On Wed, Mar 28, 2012 at 3:43 PM, Adam <brailledog@xxxxxxx> wrote:

Yeh I hear nothing at all times It doesn't matter whtere I ask for ifr
clearance or taxi clearance or simply the weather by saying get atis or get
local weather no response!




Stealth
12844
Have a good Day!

-----Original Message-----
From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@xxxxxxxxxxxxx]
On Behalf Of Tony

Sent: Wednesday, March 28, 2012 2:57 PM
To: bvipilots@xxxxxxxxxxxxx
Subject: [bvipilots] Re: Simple ATC

Does this apply to all ATC?

By this I mean, do you never hear anything from those Air Traffic
Controllers?

T

-----Original Message-----
From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@xxxxxxxxxxxxx]
On Behalf Of Adam
Sent: 28 March 2012 00:47
To: bvipilots@xxxxxxxxxxxxx
Subject: [bvipilots] Re: Simple ATC

Hello Tony
I am not sure if it has to do with the voice Transcript file Because Michell
is hearing and accknowleging the commands I am just not getting any feed
back from in this case Fx simulator!  I have checked the sounds and I get
all of the audio as far as the switches being flipped and the engine sounds
etc!  Its just when I go to request for the weather nothing happens!

For example:  When I would say turn the battery master switch on I get a
click and when I say avionics on michell responds with avionics on and
checked then if I were to say get atis I hear a click from iyp and nothing
and then if I were to say get local weather I hear the same click from iyp
and nothing no response and that goes for everything even if I run down the
checklist up to the point of requesting taxi clearance or ifr clearance I
get nothing!

I am lost no surprise!
Smile



Stealth
12844
Have a good Day!

-----Original Message-----
From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@xxxxxxxxxxxxx]
On Behalf Of Tony
Sent: Monday, March 26, 2012 1:50 PM
To: bvipilots@xxxxxxxxxxxxx
Subject: [bvipilots] Re: Simple ATC

I'd be happy to take a look at your voice Transcript file Adam if that
helps, I ran the flight yesterday with no issues other than my
forgetfulness, all worked fine.

Heavy use of the pause key and referring back got me from A to B, although
my passengers will surely have bailed out sensing my incompetence.

T

-----Original Message-----
From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@xxxxxxxxxxxxx]
On Behalf Of Adam
Sent: 26 March 2012 04:39
To: bvipilots@xxxxxxxxxxxxx
Subject: [bvipilots] Simple atc

Hello all to who are using simple atc I would like to know how its going I
am having a bit up difficulty!
I am doing the first test
And using a boeing 737-800 with Fx it seems like when I am flying from
Pennsylvania to Ontario  when I load the flight test everything comes up but
when I rundown the checklist and it comes to the weather it skipps the check
list part of that and when I just say get atis or get local weather nothing
happens I am using the IFr flight plan I also make sure that a destination
is set as well as I verify that I am using Ifr by saying select Ifr!

Any help would be great!
Thanks



Stealth
12844
Have a good Day!


Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to bvipilots@xxxxxxxxxxxxx To
unsubscribe, send a message to bvipilots-request@xxxxxxxxxxxxx and put the
word unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your
message.

Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to bvipilots@xxxxxxxxxxxxx To
unsubscribe, send a message to bvipilots-request@xxxxxxxxxxxxx and put the
word unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your
message.

Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to bvipilots@xxxxxxxxxxxxx To
unsubscribe, send a message to bvipilots-request@xxxxxxxxxxxxx and put the
word unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your
message.

Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to bvipilots@xxxxxxxxxxxxx To
unsubscribe, send a message to bvipilots-request@xxxxxxxxxxxxx and put the
word unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your
message.

Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the subject
of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your
message.





 

-- 
Image removed by sender.

 

AOPA Member No: 06936977

 

 

JPEG image

Other related posts: