[boot scriptor] Re: error 804002F9

Are you putting the CD Shell files in /boot, or /cdshell? They should be 
in /boot. Also, what is the boot configuration? Does CD Shell boot first or 
does Boot Scriptor? Since Boot Scriptor gives you the error, can you get it 
to work with CD Shell? If not, what error does that give you (or was that the 
configuration that resulted in 804002F9)?

You have a lot of stuff on that image. My suggestion would be to strip out 
everything except the boot files until you get it working. That way you can 
rapidly test different Nero settings until you can get it to work. When doing 
this, try turning off the Joliet filesystem and other non-boot-critical 
settings so you can get an idea where the problem is.

Mike

On Monday 01 March 2004 01:36 am, LAM Chi-fung wrote:
> Hello Mike, I can successfully make bootable CD on Nero 5.x.x.x before, but
> this time, I try combine ERD 2003 and O & O Bluecon (as well as some file
> with Chinese name) so I was forced to use Nero 6.3.0.3. I got 80200279 when
> using bootscriptor with Nero 6. Below link show my Nero 6 configuration, I
> am quite sure the problem from it (rather than bootscriptor/cdshell)
>
> http://www.pacific.net.hk/~cflam/config1.jpg
> http://www.pacific.net.hk/~cflam/config2.jpg
> http://www.pacific.net.hk/~cflam/config3.jpg

============================================================
Boot Scriptor mailing list -- http://www.bootscriptor.org
Change your subscription options at: http://www.freelists.org/list/bscript

Other related posts: