I vaguely recall seeing something like this once upon a time, and as I recall, it came down to something weird like the sector count for loader.bin wasn't set correctly when I made the CD image - either that, or I had forgotten to set the disk emulation to "none" when burning the disc. Jim -----Original Message----- From: Jason <someone@xxxxxxxxxxxxxxxx> Sent: May 13, 2005 1:12 AM To: bscript@xxxxxxxxxxxxx Subject: [boot scriptor] cdshell isolinux freeze/reboot? I have copied the cdshell files from The Ultimate Boot CD to a boot cd of my own which starts isolinux automatically. I have isolinux run diskemu, and it runs loader.bin from The Ultimate Boot CD. At this point I am presented with the normal cdshell menu. The problem is when I try any of the menu options that use the isolinux command. On my laptop it just freezes after displaying: ISOLINUX 3.07 03/01/2005 Copyright (C) 1994-2005 H. Peter Anvin isolinux: when using vmware it pops up a nice box displaying: *** Virtual machine kernel stack fault (hardware reset) *** The virtual machine just suffered a stack fault in kernel mode. On a real computer, this would amount to a reset of the processor. It can be caused by an incorrect configuration of the virtual machine, a bug in the operating system, or a problem in the VMware Workstation software. Press OK to reboot virtual machine or Cancel to shut it down. When I boot to The Ultimate Boot CD image that I downloaded, everything works fine, but something has failed in my configuration and I am missing the problem. Has anyone seen this before or have any insight into the problem? Thanks, Jason ============================================================ Boot Scriptor mailing list -- http://www.bootscriptor.org Change your subscription options at: http://www.freelists.org/list/bscript ============================================================ Boot Scriptor mailing list -- http://www.bootscriptor.org Change your subscription options at: http://www.freelists.org/list/bscript