[boot scriptor] Problems integrating CDshell into multiboot DVD using isolinux

Hi!

I have a multiboot DVD with isolinux as main bootloader. I tried to 
integrate UBCD 3.3, so I copied the stuff from /boot, /isolinux, /
dosapps and /images to the multiboot DVD. Finally I added the line
KERNEL /boot/loader.bin
to the main isolinux's config file.

When trying to boot UBCD, a progress bar is shown at the bottom of the 
screen (at about 33%) and I get the message that an error occured.

As far as I remember I was able to integrate UBCD version 3.2 into a 
multiboot DVD without problems (even when relocating the stuff and 
doing some changes with a hex editor).

Do you have any ideas what's wrong? I have no ideas as isolinux supports 
"no emulation" booting (and all the other "no emulation" boot systems, 
e.g. Windows based systems, seem to work).

Thanks in advance for any hints.

Cheers,
Christian

============================================================
Boot Scriptor mailing list -- http://www.bootscriptor.org
Change your subscription options at: http://www.freelists.org/list/bscript

Other related posts: