[bookport] Re: Software Versions

Once you install the software it will know where to get the firmware. We
don't post firmware locations, for obvious reasons. Just download the
software and it will take care of the rest.



Pamela Rader, TECHNICAL SUPPORT
American Printing House For The Blind
1839 Frankfort Ave.
Louisville, KY  40206

PHONE:  1-800-223-1839, Ext. 307


>>> TALMIDIM@xxxxxxxxxxxxxxxxxx 01/30/06 10:31PM >>>
I found the beta software with no problem but I have not seen the beta
firmware that peple have mentioned.  where do I find it?
----- Original Message -----
From: "PAMELA RADER" <PRADER@xxxxxxx>
To: <bookport@xxxxxxxxxxxxx>
Sent: Monday, January 30, 2006 9:18 AM
Subject: [bookport] Re: Software Versions


> Eric:
>
> Remember that software and firmware have to be compatible. So, if
you
> installed from your CD, it would be mismatched. Since you have Beta
> firmware on your Book Port, then you'll need to put Beta software
> Version 2.1.0.97 on your new computer.
>
>
>
> Pamela Rader, TECHNICAL SUPPORT
> American Printing House For The Blind
> 1839 Frankfort Ave.
> Louisville, KY  40206
>
> PHONE:  1-800-223-1839, Ext. 307
>
>
> >>> sseric57@xxxxxxxxxxx 01/30/06 10:59AM >>>
> Just so I am clear, I am using version 2.1.0.97 on my current
computer.
>  This was the beta download.  When I switch to a new computer, I
will
> have to download that same or a later version and cannot go back to
> using what came on the install CD?
>
> Thanks!
>
> Eric SS
>
>

Other related posts: