Dale: Your firmware did not update for some reason. Take the following steps: 1. Connect the Book Port. 2. Run bpfw_beta.exe and follow the instructions. 3. Disconnect the Book Port, and allow the firmware update process to run. >>> dale@xxxxxxxxxxxxxxx 06/30/04 04:40AM >>> I have download the bpfw_beta.exe and installed it. I also downloaded the new software but every time I start the bookport=20 transfer program it tells me I need new firmware and to press OKto get it. However that doesn't work. What am I doing wrong? Dale. At 01:04 AM 5/06/2004, you wrote: >There is new beta firmware that we would like some of you to try. If you = =3D >are interested, download www.aph.org/beta/bpfw_beta.exe. >There is also new beta software that you should get notified about. If = =3D >you are new to beta testing and would like to try it, check www.aph.org/be= t=3D=20 >a, then select the Book Port link. > >You will need to have the firmware before the software will work. In the = =3D >release version of this software, the user will get automatic notification= =3D >and an opertunity to download and update the firmware, but in the beta, = =3D >you must manually download and install bpfw_beta.exe. > >See www.aph.org/beta/bp_new.htm for what is new. F.ree Software Forever If you would like some f.ree software just for reading my signature = check=20 out the link below Better still, if you want more f.ree software all the time you can join=20 this pri.vate membership site for a one time payment - it offe.rs=20 incredible value and I am a m.ember myself: http://www.dalereardon.com/software/=20 Dale Reardon PO Box 4033 Wembley Western Australia 6014 Australia Phone: +61418138849 Fax: +61893888671 Email: signature@xxxxxxxxxxxxxxx=20 . =20