[bookport] Re: Audible.com books and Book Port
- From: "Dave Cunningham " <dcj638586@xxxxxxxxxxx>
- To: <bookport@xxxxxxxxxxxxx>
- Date: Wed, 21 Jul 2004 01:26:45 -0400
Question: Does anyone know if it is possible to put books downloaded =
from
audible.com on the Book Port?
Answer: Yes
Question: If so, what file format should be used 1, 2, 3, 4?
=20
Answer: Format 4 only
Question: Do you use the Audible Manager or the Book Port Transfer?
Answer: the Book Port Transfer
Question: Where do the file need to be put so the Book Port Transfer can
take place, etc.
Answer: The location of the Audible books are located in the Audible
download folder. I believe you can locate them in C:\Program
Files\Audible\Programs\Downloads I'm not exactly sure but The Book Port
software may already know where the location is. =20
NOTE: You must activate the Book port prior to using it. To do this do =
the
following.
1. Plug in your Book port into your computer.
2. When the Book port transfer program starts, tab to the options =
button
and press spacebar.
3. Press the CTRL+Tab to find the Advanced tab.
4. Press tab to the Audible activate button and press spacebar to =
activate
your Book port with Audible.
5. You will be required to enter your username and password. =20
NOTE: All the instructions above will only work so long as you are =
using
the beta firmware and software which is compatible with the audible and =
book
port. =20
Dave Cunningham
(412) 257-8153 Home
(412) 215-4597 Cell
Email address used for MSN.
=20
All incoming and outgoing email scanned by Norton Anti-virus 2003=20
-----Original Message-----
From: bookport-bounce@xxxxxxxxxxxxx =
[mailto:bookport-bounce@xxxxxxxxxxxxx]
On Behalf Of Milton M. Ota
Sent: Wednesday, July 21, 2004 12:48 AM
To: bookport@xxxxxxxxxxxxx
Subject: [bookport] Audible.com books and Book Port
Does anyone know if it is possible to put books downloaded from =
audible.com
on the Book Port?
If so, what file format should be used 1, 2, 3, 4?
Do you use the Audible Manager or the Book Port Transfer?
Where do the file need to be put so the Book Port Transfer can take =
place,
etc.
Please describe steps. Thanks.
put =20
Other related posts:
