[bookcourier] Re: Need some specific help upgrading my bookcourier, using a new card.

  • From: "Vinny Samarco" <vinsam@xxxxxxxxxxxx>
  • To: <bookcourier@xxxxxxxxxxxxx>
  • Date: Fri, 17 Dec 2004 23:05:00 -0700

Hi Ibrahim,
Thank you so very much for your clear instructions  on how to upgrade my
book courier.  I have now successfully upgraded it.
Now, I do have one more question.  On the website there was something about
a 5 megabyte file for mp3's. I am not currently using mp3's because I don't
quite understand how to use them or what to do withthem.  Therefore, is this
file in my book courier, or do I need to get it at this time?
Thanks again for your time, attention and trouble.

Sincerely,
Vinny Samarco
----- Original Message ----- 
From: "Ibrahim Gucukoglu" <igucukoglu@xxxxxxxxxxx>
To: <bookcourier@xxxxxxxxxxxxx>
Sent: Saturday, December 18, 2004 4:39 AM
Subject: [bookcourier] Re: Need some specific help upgrading my bookcourier,
using a new card.


> Hi Vinny.
>
> My name is Ibrahim and I will be assisting you with your enquiry today.
In
> order to download the latest version of the book courier firmware which
> incorporates the users guide, follow the procedure outlined below:
>
> If you haven't already done so, download and install the latest version of
> the Book Courier Transfer Tool from http://www.bookcourier.com.  Click on
> product support then download.  Follow the instructions on the page to
> download and install the transfer tool successfully.
>
> Once this is complete, connect the Book Courier to the PC.  If you chose
to
> have the transfer tool start automatically, it should launch and present
you
> with the main screen.  Bring up the help menu by tapping alt+H or by
> navigating the menu bar with the alt then left/right arrow keys.  Select
the
> item in the help menu labeled Update Book Courier and follow given
> instructions.
>
> If you should experience any difficulties, please reply to this message
and
> either myself or one of the other listers will be happy to assist you.
>
> Warmest regards, Ibrahim Gucukoglu----- Original Message ----- 
> From: "Vinny Samarco" <vinsam@xxxxxxxxxxxx>
> To: <bookcourier@xxxxxxxxxxxxx>
> Sent: Friday, December 17, 2004 8:29 AM
> Subject: [bookcourier] Re: Need some specific help upgrading my
bookcourier,
> using a new card.
>
>
> > Hi NMike,
> > Thank you.  I now have the book courier working.  But here is my next
> > question.
> > When the unit was given to me, it had a revision date of April 2004.
How
> > do
> > I download the latest updates?
> > Vinny
> > ----- Original Message ----- 
> > From: "Mike Arrigo" <n0oxy@xxxxxxxxxxx>
> > To: <bookcourier@xxxxxxxxxxxxx>
> > Sent: Friday, December 17, 2004 6:24 PM
> > Subject: [bookcourier] Re: Need some specific help upgrading my
> > bookcourier,
> > using a new card.
> >
> >
> >> You do not need to load the transfer program on to the bookcourier,
just
> > the
> >> computer. You should not have to load in the user's guide either. Since
> > this
> >> reads even with no card in the slot, it's probably built in to the
device
> >> itself.
> >> ----- Original Message ----- 
> >> From: "Vinny Samarco" <vinsam@xxxxxxxxxxxx>
> >> To: <bookcourier@xxxxxxxxxxxxx>
> >> Sent: Thursday, December 16, 2004 12:47 PM
> >> Subject: [bookcourier] Need some specific help upgrading my
bookcourier,
> >> using a new card.
> >>
> >>
> >> > Hi Everyone,
> >> > I recently lost everything on my flash memory card while changing the
> >> > batteries.  I went out and bought a new card.
> >> > I then formatted the card.  Next, I downloaded the newest version of
> >> > the
> >> > transfer tool to my pc as the instructions said.
> >> >  Am I also supposed to load the transfer tool into the book courier
> >> > into
> >> the
> >> > book courier?
> >> >     Now, since I have a new card am suppposed to copy the
ibnstructions
> > in
> >> > html format first onto my pc, an d then to my book courier.  Is that
> >> > correct?
> >> > The problem is that I can't get the instructions to save, though I
have
> >> made
> >> > a folder in my documents.  I am new to this and may not be doing
> > something
> >> > right.  Am I supposed to have a DD and an Ix file to copy both for
the
> >> > instructions and for the transfer tool user guide?
> >> > Maybe it would be easier to call someone and go step by step through
> > this
> >> > thing, so that I do it right.  I have a slow dialup connection.
> >> >
> >> > Anyone who can help me, write offlist and give me your number as long
> >> > as
> >> you
> >> > are in The Us and Canada.
> >> > Thanks for any help.
> >> >             Sincerely,            Vinny
> >> >
> >> >
> >>
> >>
> >
> >
> >
>


Other related posts: