[blindreplay] Re: dead air when recording from the line in

  • From: "Yusuf" <yusufaosman@xxxxxxxxxxxxxx>
  • To: <blindreplay@xxxxxxxxxxxxx>
  • Date: Tue, 14 Dec 2010 01:09:09 -0000

I've just been told that you can't schedule recordings from the line in. Something about sound drivers not being easy to work with. I'm pretty disappointed as I really like Replay.

Yusuf
If you have nothing better to do, why not take a look at my blog
http://yusufaosman.wordpress.com
----- Original Message ----- From: "Yusuf" <yusufaosman@xxxxxxxxxxxxxx>
To: <blindreplay@xxxxxxxxxxxxx>
Sent: Tuesday, December 14, 2010 12:26 AM
Subject: [blindreplay] Re: dead air when recording from the line in


Hi, Nothing was recorded with that either. The sound is coming out of my PC speakers so the wiring is fine. I'm also in communication with Aplian about this, so hopefully we'll be able to come up with a solution.

Interestingly enough, if the Freeview is turned on before I use the recording wizard the recording is made just fine, if not then nothing is recorded. Its all very strange.
Yusuf
If you have nothing better to do, why not take a look at my blog
http://yusufaosman.wordpress.com
----- Original Message ----- From: "Petro T. Giannakopoulos" <petrogia@xxxxxxxxx>
To: <blindreplay@xxxxxxxxxxxxx>
Sent: Monday, December 13, 2010 11:02 PM
Subject: [blindreplay] Re: dead air when recording from the line in


Try this.
Run Replay AV 8. Press shift+F10 or press your application keyboard key. Choose 'enter new show'. You will be in the properties area and within the basic tab sheet. Enter the info. Go to the recording tab sheet and choose the radio button 'capture audio from speakers / line-in'. Go back to the basic tab sheet and re-examine the properties again. make adjustments if needed. Go to the schedule tab sheet and enter your start and end times to record for you. Choose ok.

Before you do the above steps see if you can hear the audio from your tv first with Replay AV 8 running. If you hear it then line-in connections are correct. If not check cable connections.

Hope this helps.

----- Original Message ----- From: "Yusuf" <yusufaosman@xxxxxxxxxxxxxx>
To: <blindreplay@xxxxxxxxxxxxx>
Sent: Monday, December 13, 2010 4:24 PM
Subject: [blindreplay] dead air when recording from the line in


Hi, I've got my Amp connected to my line in on the back of my PC. This is so that I can record stuff off the TV with audiodescription. I know the connection is working fine as I can hear the Freeview coming out of my PC's speakers.

Yesterday I successfully managed to use Replay AV to record a program. I simply went through the recording wizard as usual and selected record something right now, then record from the line in.

Today I wanted to set up a schedule. So I activated the recording wizard, selected schedule a recording, gave the program a name, set the recording setting to line in, set the time and date and hit ok.

The recording seemed to take place ok, but afterwards I found no file in the created directory. The only thing that was there was the log and when I looked at that it seemed to be suggesting that there was dead air.

Any ideas why Replay didn't record the program correctly using a schedule?
Yusuf
If you have nothing better to do, why not take a look at my blog
http://yusufaosman.wordpress.com
--
To unsubscribe: e-mail blindreplay-request@xxxxxxxxxxxxx with unsubscribe in subject
To contact list owner: e-mail blindreplay-admins@xxxxxxxxxxxxx

--
To unsubscribe: e-mail blindreplay-request@xxxxxxxxxxxxx with unsubscribe in subject
To contact list owner: e-mail blindreplay-admins@xxxxxxxxxxxxx

--
To unsubscribe: e-mail blindreplay-request@xxxxxxxxxxxxx with unsubscribe in subject To contact list owner: e-mail blindreplay-admins@xxxxxxxxxxxxx

--
To unsubscribe: e-mail blindreplay-request@xxxxxxxxxxxxx with unsubscribe in 
subject
To contact list owner: e-mail blindreplay-admins@xxxxxxxxxxxxx

Other related posts: