[blindreplay] NVDA Capturing Music with RMC6.0.0.72

  • From: "Petro T. Giannakopoulos" <petrogia@xxxxxxxxx>
  • To: <blindreplay@xxxxxxxxxxxxx>
  • Date: Wed, 20 May 2015 11:01:56 -0400

Capturing Music that contains silence between songs with Replay Media Catcher
6.0.0.72 using NVDA 2015.1.
Read the entire message.
Earlier versions of Replay Media Catcher 6 will not work and is not accessible
with NVDA.

Prior audio tutorials can be found at,
http://blindreplay.blogspot.com

Capture Music Audio Tutorial link is below

https://dl.dropboxusercontent.com/u/7178104/NVDA-capturing%20music%20withReplay%20Media%20Catcher%206.0.0.72.mp3

Settings you need to configure are,
Go to Capture Method button.
Press spacebar.

Choose Audio Recorder mode.
Use of screen review insert+numpad 7 and insert numpad 4 or 6 is required.
Try spacebar then down arrow key then numpad 4 or numpad 6 to locate the audio
recorder mode.
Listen to my earlier podcast on this if you need help.
Use insert+numpad / then numpad / to select the Audio Recorder.

Press tab key until you hear Tab Control spoken by NVDA.
Down arrow until you hear Settings tab.
We are going to go inside the Settings tab control's multi page tab interface.
While you have focus on the Settings tab now press your tab key two times. You
will skip the reset button as you do this.
You will hear NVDA say tab control.
You are on the Settings multi page tab controls.
Press your right arrow key until you have focus on the Audio Recordings tab
sheet.
We are going to go inside the Audio Recordings properties to make the following
changes.
You go inside by pressing your tab keyboard key each time to hear its controls
that are available.
So we have navigated to
Settings tab > Audio Recordings tab sheet >
and set the following to;
Application default is Application
Format type combo box
Bit Rate combo box
Record Silence switch should be set to OFF
Its a toggle so use spacebar to toggle it.
Use insert+tab to hear the current status
Split On Silence Switch is ON
If it says off press spacebar to toggle it.
Use insert+tab to hear the current status

Press alt+r to start recording
Open music source like within your browser.
Play the stream.
alt+tab back to RMC6 program and locate the list view or walk away from your
computer.
At night, if you do not want to hear the music from your speakers connect a 1/8
inch cable to the output jack of your computer.
Focus is within RMC6 program.
The RMC6 list view / files list will show you your recordings in progress.
File name, file size, bit rate and status.
You will hear sound beats each time a song has been split.
After each sound beat a new file will be created in the RMC6 list view.
After each sound beat RMC6 will identify the song with song name and more.
It will tag your song.

When done press alt+r to stop recording.
Look at your RMC6 list view or go to your default storage folder on the hard
drive to view and play your music.
*** Important ***
When done capturing music you should change your settings back to in order to
capture your videos like on youtube to the below.

Choose Capture Method button with spacebar
Choose Stream Downloader.
Go to Settings tab control then Audio Recordings tab sheet and set the
following to,
Record Silence switch should be set to ON
Its a toggle so use spacebar to toggle it.
Use insert+tab to hear current switch status
Split On Silence Switch is OFF
If it says ON press spacebar to toggle it.
Use insert+tab to hear current switch status

Other related posts:

  • » [blindreplay] NVDA Capturing Music with RMC6.0.0.72 - Petro T. Giannakopoulos