[bct] Re: Ghostcast?

  • From: "Rose Combs" <rosecombs@xxxxxxxxx>
  • To: blindcooltech@xxxxxxxxxxxxx
  • Date: Mon, 31 Oct 2005 19:46:39 -0700

So the DS2 does not have a real pause button?  

Rose Combs

-----Original Message-----
From: blindcooltech-bounce@xxxxxxxxxxxxx
[mailto:blindcooltech-bounce@xxxxxxxxxxxxx] On Behalf Of Chris G
Sent: Monday, October 31, 2005 4:28 AM
To: blindcooltech@xxxxxxxxxxxxx
Subject: [bct] Re: Ghostcast?

Hi, I know this isn't the ds2, but the plextalk ptr1 behaves in the same
way. if you want your file closed on the ptr1, press stop.  if you ant to
continue in the same file, press pause. I just thought people would benefit
from this. also, if you use the plextalk ptr1's editing functions to delete
errors, they are not actually gone from the file. Somehow the ptr1 marks
them as bad and just ignores them. I found that out the hard way. Chris

On Sun, 30 Oct 2005 21:25:51 -0800
"Mary Emerson" <maryemerson@xxxxxxxxxxxxx> wrote:

> Rose,
> In addition to Jamie's excellent summary, you should know that every 
> time
> you stop a recording and then press record again, a new file is created
> the file you were previously recording is closed. So, to keep your career 
> podcast in one file, use pause each time you want to stop, by pressing 
> record to pause; then press record again to start recording again. You
> know when it's pausing because it will beep a certain way, and it will
> another way when you start recording again. When you're all done talking, 
> press stop and the file will close and save to the memory. And it will be 
> ready for you to send up to the PC.
> Make sure you have the proprietary USB cable that came with the unit; 
> the
> DS2 doesn't use a standard USB cable.
> Mary
> __________ NOD32 1.1267 (20051028) Information __________
> This message was checked by NOD32 antivirus system. 
> http://www.eset.com

Chris G <chrisg@xxxxxxxxxxxxxxxx>
A stitch in time saves nine. -English Proverb.

Other related posts: