RE: Iriver 799 documentation.

  • From: <rusty.perez@xxxxxxxxxxxxx>
  • To: <blindcasting@xxxxxxxxxxxxx>
  • Date: Sun, 9 Oct 2005 01:23:26 -0700

Make sure you are using the 7xx firmware for the 799. I tried the 8xx and it
did exactly what you're describing.
Also, I think you should probably have all other programs which might try to
access the player turned off.

Good luck
Rusty
 


____________________
Skype: rustyperez
Yahoo and AIM: reliroo
Check out my blog at
http://rusty-perez.blogspot.com

-----Original Message-----
From: blindcasting-bounce@xxxxxxxxxxxxx
[mailto:blindcasting-bounce@xxxxxxxxxxxxx] On Behalf Of FrankLizarde
Sent: Saturday, October 08, 2005 7:08 PM
To: blindcasting@xxxxxxxxxxxxx
Subject: Re: Iriver 799 documentation.

Hi Rusty,
Yes, I did here that USB ding when I plugged in the Iriver, but I never
heard it again to indicate it shutting down.
I've tried it a few times, but I guess I'll try it again!
Thanks.
----- Original Message -----
From: <rusty.perez@xxxxxxxxxxxxx>
To: <blindcasting@xxxxxxxxxxxxx>
Sent: Saturday, October 08, 2005 3:25 PM
Subject: RE: Iriver 799 documentation.


> Frank, first of all, did your computer recognize the iriver to start with?
> That is, did you hear the sound that tells you that a device was 
> connected?
> If you didn't hear this, then you need to press the play button while 
> the player is connected, making sure that the lock switch is to the left.
> If you did hear the sound saying it was connected, ideally, you will 
> hear the sound of disconnection when the firmware has been updated.
> That's the way it worked with me at least.
> The 7xx firmware is the correct one.
>
> Good luck!
>
>
> ____________________
> Skype: rustyperez
> Yahoo and AIM: reliroo
> Check out my blog at
> http://rusty-perez.blogspot.com
>
> -----Original Message-----
> From: blindcasting-bounce@xxxxxxxxxxxxx 
> [mailto:blindcasting-bounce@xxxxxxxxxxxxx] On Behalf Of FrankLizarde
> Sent: Saturday, October 08, 2005 2:06 PM
> To: blindcasting@xxxxxxxxxxxxx
> Subject: Re: Iriver 799 documentation.
>
> Does the firmware upgrade take a long time?
> What happened was that I installed the manager.
> Then I downloaded the firmware, which was IFP-7XX.HEX.
> Is it the correct one for the IFP799?
> Then I opened the file from with in the manager.
> It told me that it was updating the firmware or something like that, 
> and to please wait, but it gave me an OK button.
> So I waited for a while and nothing happened.
> Then I hit the OK button and waited for a while, but the unit never 
> powered down.
> What did I do wrong?
> Could someone help please?
> It's terrible to have a new tool or toy, and not to be able to use it!
> Thanks in advance!
> ----- Original Message -----
> From: "Donald L. Roberts" <donald_roberts_99@xxxxxxxxx>
> To: <blindcasting@xxxxxxxxxxxxx>
> Sent: Friday, October 07, 2005 2:43 PM
> Subject: Iriver 799 documentation.
>
>
>>    Hello,
>>
>> I need documentation for the 799 which I received yesterday but am not
>> permitted to use until my birthday on the 15th.    Documentation in
>> this case refers to any informative or instructive materials, not 
>> strictly the company manual.
>>
>> I want to learn to use this thing but had hard drive problems and no 
>> longer have Shane's great instructions as well as other instructional 
>> materials.  If persons on this list would forward relevant emails 
>> about using this thing to:
>>
>> donald_roberts_99@xxxxxxxxx
>>
>> I would be most grateful.  Also, what is the url for Shane's 
>> informative podcast about the 799?  Thanks much.
>>
>> Don Roberts
>>
>>
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.344 / Virus Database: 267.11.13/124 - Release Date: 
> 10/7/2005
>
>
> 




--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.13/124 - Release Date: 10/7/2005



Other related posts: