[bksvol-discuss] Re: opticbook scanning

it is the best scanner I have ever owned.
----- Original Message ----- From: "Darrell Shandrow" <darrell.shandrow@xxxxxxxxx> 
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Thursday, July 17, 2008 9:16 PM
Subject: [bksvol-discuss] Re: opticbook scanning



Hello Larry and Robert,

I have also scanned paperbacks on my OpticBook 3600 and, while they're not
perfect, I also haven't noticed a consistent problem with missing characters 
from the binding. I'm quite sure the light doesn't go right up to the book
edge, but I also doubt the distance is anything approaching an inch.
----- Original Message ----- From: "Larry Lumpkin" <llumpkin@xxxxxxxxxxxxx> 
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Thursday, July 17, 2008 7:14 PM
Subject: [bksvol-discuss] Re: opticbook scanning


I scan paperbacks on my opticbook all the time and haven't noticed that
problem. My wife validates the books and she hasn't mentioned this problem 
to me.
----- Original Message ----- From: "Robert Riddle" <captinlogic@xxxxxxxxx> 
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Thursday, July 17, 2008 8:07 PM
Subject: [bksvol-discuss] Re: opticbook scanning



That opticbook is best suited for hardbacks, rather than paperbacks. This
is because the light doesn't go all the way to the edge of the scanner,
but stops about an inch in. This means that if you try scanning a regular
paperback by putting the binder flush with the edge, you'll get chopped
off words because the inner margins didn't get scanned. Try using a
hardback on an opticbook. YOu'll be amazed.
----- Original Message ----- From: "Meka White" <mekawh@xxxxxxxxx> 
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Thursday, July 17, 2008 6:36 PM
Subject: [bksvol-discuss] opticbook scanning



Hi Jackie and others:

I am reminded of a problem that I have in terms of the opticbook.

Whenever I use the reading edge with kurzweil, I never, and I do mean
never,
get a clean scan.  It's so full of errors and it hits way below a normal
confidence level. I have used different books, have tried optimizing, but 
to
no avail.
Do you have any suggestions? I thought I wasn't using the edge correctly 
but after Jackie's explanation, I realize that I'm at least doing the
mechanics correctly.

Meka

To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line.  To get a list
of available commands, put the word 'help' by itself in the subject line. 



To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line.  To get a list
of available commands, put the word 'help' by itself in the subject line.


To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of 
available commands, put the word 'help' by itself in the subject line.

To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line. 

To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line.  To get a list of 
available commands, put the word 'help' by itself in the subject line.

Other related posts: