[bksvol-discuss] Re: new scanner has arrived help!
- From: "Larry Lumpkin" <llumpkin@xxxxxxxxxxxxx>
- To: <bksvol-discuss@xxxxxxxxxxxxx>
- Date: Sat, 12 Sep 2009 15:12:14 -0500
Did you unlock the head by letting the lock lever down under the right front
leg?
-----Original Message-----
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Shelley L. Rhodes
Sent: Saturday, September 12, 2009 2:37 PM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Re: new scanner has arrived help!
yep, downloaded the latest driver, which included the patch.
It warms up fine, it is sticking on its way back from finishing a scan.
----- Original Message -----
From: "Jackie McBride" <abletec@xxxxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Saturday, September 12, 2009 3:30 PM
Subject: [bksvol-discuss] Re: new scanner has arrived help!
> Shelly, did u download & install the warmup.exe patch?
>
> On 9/12/09, Shelley L. Rhodes <guidinggolden@xxxxxxxxx> wrote:
>> Thank you for these.
>>
>> I did all of these, but... I encountered a problem.
>>
>> The lamp seems to get stuck near the end of its cycle, it just won't go
>> any
>> farther and it sounds like it shouldn't be doing that.
>>
>> I know someone else had that problem and they contacted the company and
>> it
>> was resolved.
>>
>> Smile.
>>
>> But I did what he said, and it does work well, just need to work on the
>> frozen lamp thing, smile.
>>
>>
>> ----- Original Message -----
>> From: "Larry Lumpkin" <llumpkin@xxxxxxxxxxxxx>
>> To: <bksvol-discuss@xxxxxxxxxxxxx>
>> Sent: Thursday, September 10, 2009 10:52 PM
>> Subject: [bksvol-discuss] Re: new scanner has arrived help!
>>
>>
>>> Here are the instructions straight from Nick.
>>>
>>>
>>> " 1. Download OpticBook's drivers from the <plustek.com> site, as they
>>> are
>>> text-based and easier for We Blind user's to run than the 2 discs full
>>> of
>>> unnecessary
>>> software which ship with the unit.
>>> 2. Uninstall any current scanner software, and immediately thereafter,
>>> or
>>> at least after the next "reboot" use (shift_del) on "windows\twain_32"
>>> folder and
>>> subsidiary folders so it won't leave Windoes confused, don't worry the
>>> folder will be recreated during installation of OpticBook 3600 software.
>>> 3. Unlock scanner head lock located behind front right foot of scanner,
>>> front being book edge, rear being top's hinges. Plug scanner into USB II
>>> port on
>>> computer, and power and power-up the scanner.
>>> 4. Install software.
>>> 5. DO NOT REMOVE "Option Express OpticBook manager from StartUp group
>>> under
>>> any circumstances.
>>> 6. Have trustworthy sighted person access "task Tray.OpticBook Action
>>> Express.utilities" and advance scanner light on durration slider as far
>>> as
>>> it will go (15
>>> minutes or...
>>> 7.
>>> Run "program files\kurzweil educational systems\diags\scanconf.exe" set
>>> all
>>> "ADF" related parameters including "Full Duplex" to "off/disabled",
>>> "Native
>>> Scan" to "on/enabled", "Hold Scanner" to "never" and, "Fast Cancel" to
>>> "enabled". Finally, "click" on "Done".
>>> 8. Make sure "WIA" scanner driver is selected in Kurzweil 1000.scanner
>>> settings.scanner source" (alt_t s alt_s) make sure "WIA" OpticBook
>>> Driver,
>>> is
>>> selected, then, "OK" and Save Settings in Default Settings file, (alt_t
>>> v)
>>> and "enter"
>>> 9. Try a scan."
>>>
>>> -----Original Message-----
>>> From: bksvol-discuss-bounce@xxxxxxxxxxxxx
>>> [mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Shelley L.
>>> Rhodes
>>> Sent: Thursday, September 10, 2009 9:07 PM
>>> To: bksvol-discuss@xxxxxxxxxxxxx
>>> Subject: [bksvol-discuss] new scanner has arrived help!
>>>
>>> O.k. guys, it has arrived, now... where do I put the drivers, when i
>>> find
>>> them. is there a particular folder where they need to go?
>>>
>>> You can tell I don't do this that often.
>>>
>>> Shelley L. Rhodes, M.A., VRT
>>> And Guinevere: retired Guide Dog
>>> guidinggolden@xxxxxxxxx
>>> Guide Dogs for the Blind
>>> Alumni Association
>>> www.guidedogs.com
>>>
>>> America has been called a melting pot, but it seems better to call it a
>>> mosaic, for in it each nation, people or race which has come to its
>>> shores
>>> has been privileged to keep its individuality, contributing at the same
>>> time
>>> its share to the unified pattern of a new nation. -King Baudouin of
>>> Belgium
>>> (1930-1993)
>>>
>>> To unsubscribe from this list send a blank Email to
>>> bksvol-discuss-request@xxxxxxxxxxxxx
>>> put the word 'unsubscribe' by itself in the subject line. To get a list
>>> of
>>> available commands, put the word 'help' by itself in the subject line.
>>>
>>> To unsubscribe from this list send a blank Email to
>>> bksvol-discuss-request@xxxxxxxxxxxxx
>>> put the word 'unsubscribe' by itself in the subject line. To get a list
>>> of available commands, put the word 'help' by itself in the subject
>>> line.
>>>
>>
>> To unsubscribe from this list send a blank Email to
>> bksvol-discuss-request@xxxxxxxxxxxxx
>> put the word 'unsubscribe' by itself in the subject line. To get a list
>> of
>> available commands, put the word 'help' by itself in the subject line.
>>
>>
>
>
> --
> Change the world--1 deed at a time
> Jackie McBride
> Check out my homepage at:
> www.abletec.serverheaven.net
> & please join my fight against breast cancer
> <http://teamacs.acsevents.org/site/TR?px=1790196&pg=personal&fr_id=3489>
> To unsubscribe from this list send a blank Email to
> bksvol-discuss-request@xxxxxxxxxxxxx
> put the word 'unsubscribe' by itself in the subject line. To get a list
> of available commands, put the word 'help' by itself in the subject line.
>
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of
available commands, put the word 'help' by itself in the subject line.
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of
available commands, put the word 'help' by itself in the subject line.
Other related posts:
