[bksvol-discuss] Re: new scanner has arrived help!

Where is the warmup.exe patch found?

-----Original Message-----
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Jackie McBride
Sent: Saturday, September 12, 2009 2:31 PM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Re: new scanner has arrived help!

Shelly, did u download & install the warmup.exe patch?

On 9/12/09, Shelley L. Rhodes <guidinggolden@xxxxxxxxx> wrote:
> Thank you for these.
>
> I did all of these, but... I encountered a problem.
>
> The lamp seems to get stuck near the end of its cycle, it just won't 
> go any farther and it sounds like it shouldn't be doing that.
>
> I know someone else had that problem and they contacted the company 
> and it was resolved.
>
> Smile.
>
> But I did what he said, and it does work well, just need to work on 
> the frozen lamp thing, smile.
>
>
> ----- Original Message -----
> From: "Larry Lumpkin" <llumpkin@xxxxxxxxxxxxx>
> To: <bksvol-discuss@xxxxxxxxxxxxx>
> Sent: Thursday, September 10, 2009 10:52 PM
> Subject: [bksvol-discuss] Re: new scanner has arrived help!
>
>
>> Here are the instructions straight from Nick.
>>
>>
>> " 1. Download OpticBook's drivers from the <plustek.com> site, as 
>> they are text-based and easier for We Blind user's to run than the 2 
>> discs full of unnecessary software which ship with the unit.
>> 2. Uninstall any current scanner software, and immediately 
>> thereafter, or at least after the next "reboot" use (shift_del) on
"windows\twain_32"
>> folder and
>> subsidiary folders so it won't leave Windoes confused, don't worry 
>> the folder will be recreated during installation of OpticBook 3600
software.
>> 3. Unlock scanner head lock located behind front right foot of 
>> scanner, front being book edge, rear being top's hinges. Plug scanner 
>> into USB II port on computer, and power and power-up the scanner.
>> 4. Install software.
>> 5. DO NOT REMOVE "Option Express OpticBook manager from StartUp group 
>> under any circumstances.
>> 6. Have trustworthy sighted person access "task Tray.OpticBook Action 
>> Express.utilities" and advance scanner light on durration slider as 
>> far as it will go (15 minutes or...
>> 7.
>> Run "program files\kurzweil educational systems\diags\scanconf.exe" 
>> set all "ADF" related parameters including "Full Duplex" to 
>> "off/disabled", "Native Scan" to "on/enabled", "Hold Scanner" to 
>> "never" and, "Fast Cancel" to "enabled". Finally, "click" on "Done".
>> 8. Make sure "WIA" scanner driver is selected in Kurzweil 
>> 1000.scanner settings.scanner source" (alt_t s alt_s) make sure "WIA" 
>> OpticBook Driver, is selected, then, "OK" and Save Settings in 
>> Default Settings file, (alt_t v) and "enter"
>> 9. Try a scan."
>>
>> -----Original Message-----
>> From: bksvol-discuss-bounce@xxxxxxxxxxxxx
>> [mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Shelley L.
>> Rhodes
>> Sent: Thursday, September 10, 2009 9:07 PM
>> To: bksvol-discuss@xxxxxxxxxxxxx
>> Subject: [bksvol-discuss] new scanner has arrived help!
>>
>> O.k. guys, it has arrived, now... where do I put the drivers, when i 
>> find them.  is there a particular folder where they need to go?
>>
>> You can tell I don't do this that often.
>>
>> Shelley L. Rhodes, M.A., VRT
>> And Guinevere: retired Guide Dog
>> guidinggolden@xxxxxxxxx
>> Guide Dogs for the Blind
>> Alumni Association
>> www.guidedogs.com
>>
>> America has been called a melting pot, but it seems better to call it 
>> a mosaic, for in it each nation, people or race which has come to its 
>> shores has been privileged to keep its individuality, contributing at 
>> the same time its share to the unified pattern of a new nation. -King 
>> Baudouin of Belgium
>> (1930-1993)
>>
>> To unsubscribe from this list send a blank Email to 
>> bksvol-discuss-request@xxxxxxxxxxxxx
>> put the word 'unsubscribe' by itself in the subject line.  To get a 
>> list of available commands, put the word 'help' by itself in the 
>> subject line.
>>
>> To unsubscribe from this list send a blank Email to 
>> bksvol-discuss-request@xxxxxxxxxxxxx
>> put the word 'unsubscribe' by itself in the subject line.  To get a 
>> list of available commands, put the word 'help' by itself in the subject
line.
>>
>
>  To unsubscribe from this list send a blank Email to 
> bksvol-discuss-request@xxxxxxxxxxxxx
> put the word 'unsubscribe' by itself in the subject line.  To get a 
> list of available commands, put the word 'help' by itself in the subject
line.
>
>


--
Change the world--1 deed at a time
Jackie McBride
Check out my homepage at:
www.abletec.serverheaven.net
& please join my fight against breast cancer
<http://teamacs.acsevents.org/site/TR?px=1790196&pg=personal&fr_id=3489>
 To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line.  To get a list of
available commands, put the word 'help' by itself in the subject line.

 To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line.  To get a list of 
available commands, put the word 'help' by itself in the subject line.

Other related posts: