Shelly, did u download & install the warmup.exe patch? On 9/12/09, Shelley L. Rhodes <guidinggolden@xxxxxxxxx> wrote: > Thank you for these. > > I did all of these, but... I encountered a problem. > > The lamp seems to get stuck near the end of its cycle, it just won't go any > farther and it sounds like it shouldn't be doing that. > > I know someone else had that problem and they contacted the company and it > was resolved. > > Smile. > > But I did what he said, and it does work well, just need to work on the > frozen lamp thing, smile. > > > ----- Original Message ----- > From: "Larry Lumpkin" <llumpkin@xxxxxxxxxxxxx> > To: <bksvol-discuss@xxxxxxxxxxxxx> > Sent: Thursday, September 10, 2009 10:52 PM > Subject: [bksvol-discuss] Re: new scanner has arrived help! > > >> Here are the instructions straight from Nick. >> >> >> " 1. Download OpticBook's drivers from the <plustek.com> site, as they are >> text-based and easier for We Blind user's to run than the 2 discs full of >> unnecessary >> software which ship with the unit. >> 2. Uninstall any current scanner software, and immediately thereafter, or >> at least after the next "reboot" use (shift_del) on "windows\twain_32" >> folder and >> subsidiary folders so it won't leave Windoes confused, don't worry the >> folder will be recreated during installation of OpticBook 3600 software. >> 3. Unlock scanner head lock located behind front right foot of scanner, >> front being book edge, rear being top's hinges. Plug scanner into USB II >> port on >> computer, and power and power-up the scanner. >> 4. Install software. >> 5. DO NOT REMOVE "Option Express OpticBook manager from StartUp group >> under >> any circumstances. >> 6. Have trustworthy sighted person access "task Tray.OpticBook Action >> Express.utilities" and advance scanner light on durration slider as far as >> it will go (15 >> minutes or... >> 7. >> Run "program files\kurzweil educational systems\diags\scanconf.exe" set >> all >> "ADF" related parameters including "Full Duplex" to "off/disabled", >> "Native >> Scan" to "on/enabled", "Hold Scanner" to "never" and, "Fast Cancel" to >> "enabled". Finally, "click" on "Done". >> 8. Make sure "WIA" scanner driver is selected in Kurzweil 1000.scanner >> settings.scanner source" (alt_t s alt_s) make sure "WIA" OpticBook Driver, >> is >> selected, then, "OK" and Save Settings in Default Settings file, (alt_t v) >> and "enter" >> 9. Try a scan." >> >> -----Original Message----- >> From: bksvol-discuss-bounce@xxxxxxxxxxxxx >> [mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Shelley L. >> Rhodes >> Sent: Thursday, September 10, 2009 9:07 PM >> To: bksvol-discuss@xxxxxxxxxxxxx >> Subject: [bksvol-discuss] new scanner has arrived help! >> >> O.k. guys, it has arrived, now... where do I put the drivers, when i find >> them. is there a particular folder where they need to go? >> >> You can tell I don't do this that often. >> >> Shelley L. Rhodes, M.A., VRT >> And Guinevere: retired Guide Dog >> guidinggolden@xxxxxxxxx >> Guide Dogs for the Blind >> Alumni Association >> www.guidedogs.com >> >> America has been called a melting pot, but it seems better to call it a >> mosaic, for in it each nation, people or race which has come to its shores >> has been privileged to keep its individuality, contributing at the same >> time >> its share to the unified pattern of a new nation. -King Baudouin of >> Belgium >> (1930-1993) >> >> To unsubscribe from this list send a blank Email to >> bksvol-discuss-request@xxxxxxxxxxxxx >> put the word 'unsubscribe' by itself in the subject line. To get a list >> of >> available commands, put the word 'help' by itself in the subject line. >> >> To unsubscribe from this list send a blank Email to >> bksvol-discuss-request@xxxxxxxxxxxxx >> put the word 'unsubscribe' by itself in the subject line. To get a list >> of available commands, put the word 'help' by itself in the subject line. >> > > To unsubscribe from this list send a blank Email to > bksvol-discuss-request@xxxxxxxxxxxxx > put the word 'unsubscribe' by itself in the subject line. To get a list of > available commands, put the word 'help' by itself in the subject line. > > -- Change the world--1 deed at a time Jackie McBride Check out my homepage at: www.abletec.serverheaven.net & please join my fight against breast cancer <http://teamacs.acsevents.org/site/TR?px=1790196&pg=personal&fr_id=3489> To unsubscribe from this list send a blank Email to bksvol-discuss-request@xxxxxxxxxxxxx put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.