yep, I know that sound, smile.----- Original Message ----- From: "Larry Lumpkin" <llumpkin@xxxxxxxxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx> Sent: Saturday, September 12, 2009 4:12 PM Subject: [bksvol-discuss] Re: new scanner has arrived help!
Did you unlock the head by letting the lock lever down under the right frontleg? -----Original Message----- From: bksvol-discuss-bounce@xxxxxxxxxxxxx[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Shelley L. RhodesSent: Saturday, September 12, 2009 2:37 PM To: bksvol-discuss@xxxxxxxxxxxxx Subject: [bksvol-discuss] Re: new scanner has arrived help! yep, downloaded the latest driver, which included the patch. It warms up fine, it is sticking on its way back from finishing a scan. ----- Original Message ----- From: "Jackie McBride" <abletec@xxxxxxxxx> To: <bksvol-discuss@xxxxxxxxxxxxx> Sent: Saturday, September 12, 2009 3:30 PM Subject: [bksvol-discuss] Re: new scanner has arrived help!Shelly, did u download & install the warmup.exe patch? On 9/12/09, Shelley L. Rhodes <guidinggolden@xxxxxxxxx> wrote:Thank you for these. I did all of these, but... I encountered a problem. The lamp seems to get stuck near the end of its cycle, it just won't go any farther and it sounds like it shouldn't be doing that. I know someone else had that problem and they contacted the company and it was resolved. Smile. But I did what he said, and it does work well, just need to work on the frozen lamp thing, smile. ----- Original Message ----- From: "Larry Lumpkin" <llumpkin@xxxxxxxxxxxxx> To: <bksvol-discuss@xxxxxxxxxxxxx> Sent: Thursday, September 10, 2009 10:52 PM Subject: [bksvol-discuss] Re: new scanner has arrived help!Here are the instructions straight from Nick. " 1. Download OpticBook's drivers from the <plustek.com> site, as they are text-based and easier for We Blind user's to run than the 2 discs full of unnecessary software which ship with the unit. 2. Uninstall any current scanner software, and immediately thereafter, or at least after the next "reboot" use (shift_del) on "windows\twain_32" folder and subsidiary folders so it won't leave Windoes confused, don't worry thefolder will be recreated during installation of OpticBook 3600 software.3. Unlock scanner head lock located behind front right foot of scanner,front being book edge, rear being top's hinges. Plug scanner into USB IIport on computer, and power and power-up the scanner. 4. Install software. 5. DO NOT REMOVE "Option Express OpticBook manager from StartUp group under any circumstances. 6. Have trustworthy sighted person access "task Tray.OpticBook Action Express.utilities" and advance scanner light on durration slider as far as it will go (15 minutes or... 7. Run "program files\kurzweil educational systems\diags\scanconf.exe" set all "ADF" related parameters including "Full Duplex" to "off/disabled", "Native Scan" to "on/enabled", "Hold Scanner" to "never" and, "Fast Cancel" to "enabled". Finally, "click" on "Done". 8. Make sure "WIA" scanner driver is selected in Kurzweil 1000.scanner settings.scanner source" (alt_t s alt_s) make sure "WIA" OpticBook Driver, is selected, then, "OK" and Save Settings in Default Settings file, (alt_t v) and "enter" 9. Try a scan." -----Original Message----- From: bksvol-discuss-bounce@xxxxxxxxxxxxx [mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Shelley L. Rhodes Sent: Thursday, September 10, 2009 9:07 PM To: bksvol-discuss@xxxxxxxxxxxxx Subject: [bksvol-discuss] new scanner has arrived help! O.k. guys, it has arrived, now... where do I put the drivers, when i find them. is there a particular folder where they need to go? You can tell I don't do this that often. Shelley L. Rhodes, M.A., VRT And Guinevere: retired Guide Dog guidinggolden@xxxxxxxxx Guide Dogs for the Blind Alumni Association www.guidedogs.com America has been called a melting pot, but it seems better to call it a mosaic, for in it each nation, people or race which has come to its shores has been privileged to keep its individuality, contributing at the same time its share to the unified pattern of a new nation. -King Baudouin of Belgium (1930-1993) To unsubscribe from this list send a blank Email to bksvol-discuss-request@xxxxxxxxxxxxxput the word 'unsubscribe' by itself in the subject line. To get a listof available commands, put the word 'help' by itself in the subject line. To unsubscribe from this list send a blank Email to bksvol-discuss-request@xxxxxxxxxxxxxput the word 'unsubscribe' by itself in the subject line. To get a listof available commands, put the word 'help' by itself in the subject line.To unsubscribe from this list send a blank Email to bksvol-discuss-request@xxxxxxxxxxxxx put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.-- Change the world--1 deed at a time Jackie McBride Check out my homepage at: www.abletec.serverheaven.net & please join my fight against breast cancer <http://teamacs.acsevents.org/site/TR?px=1790196&pg=personal&fr_id=3489> To unsubscribe from this list send a blank Email to bksvol-discuss-request@xxxxxxxxxxxxx put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.To unsubscribe from this list send a blank Email to bksvol-discuss-request@xxxxxxxxxxxxxput the word 'unsubscribe' by itself in the subject line. To get a list ofavailable commands, put the word 'help' by itself in the subject line. To unsubscribe from this list send a blank Email to bksvol-discuss-request@xxxxxxxxxxxxxput the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.
To unsubscribe from this list send a blank Email to bksvol-discuss-request@xxxxxxxxxxxxx put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.
