[bksvol-discuss] Re: long dashes.
- From: "Curtis Delzer" <curtis@xxxxxxxxxx>
- To: <bksvol-discuss@xxxxxxxxxxxxx>
- Date: Wed, 5 Mar 2008 23:37:28 -0600
Thank you Rick, I'll do that with my copy after I've sent the *.rtf file to
be proofed, as it were. I wonder which ASCII character the "long dash" is?
Take care.
Curtis Delzer
----- Original Message -----
From: "RJ / KJ" <d28rik@xxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Wednesday, March 05, 2008 11:25 PM
Subject: [bksvol-discuss] Re: long dashes.
I'm glad someone brought up the business of the long dash. Especially as it
relates to Kurzweil.
I too have been bothered by this, mostly when I read using the speech in
Kurzweil. It takes the two words that are connected by a long dash, and not
otherwise separated, and the speech is mostly unrecognizable.
I have addressed this on a couple of occasions:
1. In Kurzeile, I find a long dash, and copy just the characther by itself
to the clip board.
2. Then I go to the the top of the file
3. Then I open the Search dialog. I paste in the long dash character in the
Search For field.
4. Then I hit ALT R to open the Replace With field.
5. I then paste in the long dash there.
6. I type in a space after the long dash.
7. Then from there, you can either use the Replace All or go to the Next
occurance and replace it or not.
All it does is put a space after the long dash, so now there is a separator,
and the speech reads it correctly.
I don't know if this would be considered a bad thing, as far as editing the
text.
But since it reads much, much better, I think it is justifiable.
Perhaps someone may comment.
Note, as someone else stated, Jaws just says em dash, and when reading I
don't thinking it really verbalizes the long dash, at least not to the
irritating extent that the kurzweill does. Using my FM transmitter, I've
recently started to read lots of my files, news etc with the K-1000. I've
not heard the long dashes with anything except my scanned books. So I don't
know why that might be.
Thanks.
Rik
-----Original Message-----
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Curtis Delzer
Sent: Wednesday, March 05, 2008 10:08 PM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Re: long dashes.
It just makes reading them a little weird since synthesizers tend to ignore
them, making the pronunciation, strange.
Curtis Delzer
----- Original Message -----
From: EVAN REESE <mailto:mentat3@xxxxxxxxxxx>
To: bksvol-discuss@xxxxxxxxxxxxx
Sent: Wednesday, March 05, 2008 10:47 PM
Subject: [bksvol-discuss] Re: long dashes.
You don't need to do anything about the long dashes. What Kurzweil calls the
"long dash" is just another name for the em dash, a common punctuation mark.
Converting the file to rtf should not affect the em dashes in any way. If
you convert the file to rtf and then open it up in word, I am confident that
you will see the em dashes intact. I have done it many times.
Evan
----- Original Message -----
From: Curtis Delzer <mailto:curtis@xxxxxxxxxx>
To: bksvol-discuss@xxxxxxxxxxxxx
Sent: Wednesday, March 05, 2008 11:11 PM
Subject: [bksvol-discuss] long dashes.
Hi all. I need some advice. I just finished scanning a book entitled
"Jitterbug," by
Loren D. Estleman
and in it, Kurzweil 1000 V11 recognizes the long dashes. Should I do
something about that before I export to *.rtf, or should I submit it in
*.kes format? The scan is quite good after I changed "die," to "the," where
fortunately there weren't too many "dies," in the book. :)
Thanks! I submitted a book many years ago, "A Tiger Walks," by Ian
Niall," written in 1961, and actually scanned by, get a load of this, a
Kurzweil Personal Reader, and it was practically perfect, in 1992. How's
that for an ancient scan? :)
Curtis Delzer
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of
available commands, put the word 'help' by itself in the subject line.
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of
available commands, put the word 'help' by itself in the subject line.
Other related posts:
