[bksvol-discuss] Re: extra garbage at the bottom of scanned pages

You might try increasing or decreasing your brightness setting. Kurzweil has
a list of some of the characters you are apt to see when brightness is too
high or too low.
----- Original Message ----- 
From: "bud schwab" <budschwab@xxxxxxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Wednesday, February 02, 2005 8:29 AM
Subject: [bksvol-discuss] Re: extra garbage at the bottom of scanned pages


> Hi Mary,
> Thanks for the reply.  I did have my wife look at it and it did show all
> that garbage on the screen, but the book page looked perfectly normal.
I'm
> going to do some experimenting with settings etc and see if I can
establish
> a trend.  It seems to be so intermittant that I don't think I will find
out
> much.   I will try to send Stephen an image of it although I'm not sure
> just how to do that.
>
> Another unrelated situation I have is whenever I use fine reader my
machine
> crashes.
> Oh, isn't scanning fun!  It's also a challenge and that's what makes it so
> interesting and fun.
>
> Bud
>
> At 09:24 AM 2/1/2005, you wrote:
> >Bud,
> >If you're getting this junk regardless of engine and setting, it may be
> >that your scanner has a problem. You might try scanning something with
> >save images enabled. Then, when you find a page with the problem, get
> >your wife to look at the image, and see if she sees anything at the
bottom
> >that might be causing the problem. You can also try sending an image or
> >two directly to Stephen at Kurzweil if you have his direct address.
> >Mary
>
> Bud Schwab
> W 6 Z Y P
> Malibu, California
>
>
>
>

Other related posts: