[bksvol-discuss] Re: .doc to.rtf

Hi Roger,

        As you must know, doc files can be opened in wordpad, but you can't
save in that format.  Ann's method works the same in wordpad as it does in
word.  In case you thought her instructions wouldn't apply, because she
directed you to use an application that you don't have, here they are again
with a couple of minor changes:

1.  Go into Wordpad.

2.  Open your file using the open dialogue in the file menu.

3.  Go to file menu.

4.  Arrow down to save-as.

5.  Tab once to the combo box, 'files of type'.

6.  Use your down-arrow to go to RTF.

7.  Tab to save and hit the spacebar.

  And if you figured that out on your own, sorry to clutter your mailbox.

Mayrie



1.  Go into Word.

2.  Open your file.

3.  Go to file menu.

4.  Arrow down to save-as.

5.  Tab once to the combo box, 'files of type'.

6.  Use your down-arrow to go to RTF.

7.  Tab to save and hit the spacebar.

 

-----Original Message-----
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of
Rogerbailey81@xxxxxxx
Sent: Tuesday, September 02, 2008 6:25 PM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] .doc to.rtf

How do I convert a .doc file to .rtf?



________________________________

It's only a deal if it's where you want to go. Find your travel deal here
<http://information.travel.aol.com/deals?ncid=aoltrv00050000000047> .

 To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line.  To get a list of 
available commands, put the word 'help' by itself in the subject line.

Other related posts: