[bksvol-discuss] Re: advice

I think it is 300 where Kurzweil sets it.
Skype contact bobwichitaks phone 316-524-5454
----- Original Message ----- From: "Silvara" <silvara@xxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Thursday, November 29, 2007 9:21 PM
Subject: [bksvol-discuss] Re: advice


Hmmm. What dpi do you use? I use 400 for the most part.
----- Original Message ----- From: "robert tweedy" <roberttweedy@xxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Thursday, November 29, 2007 5:53 PM
Subject: [bksvol-discuss] Re: advice


Grace I let Kurzweil do it's paces first and it seems if I change one setting to get the page and chapter numbers, it messes it up for the text and get the common scanning errors.
Skype contact bobwichitaks phone 316-524-5454
----- Original Message ----- From: "Silvara" <silvara@xxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Thursday, November 29, 2007 9:34 AM
Subject: [bksvol-discuss] Re: advice


Hi:

It sounds like you're using K1000? If so I always use fine Reader. Occasionally I use Scansoft to scan back cover material. I don't know if this has been fixed but I had noticed that Scansoft got rid of m-dashes and so I don't use it. I haven't had a problem with Fine reader not scanning page numbers. I play around with setting before starting a scanning project.
***
Grace

For scanning and validating  tips
check out
http://www.jbrownell.com/bks/tl.asp

For ideas of books to scan check out:
the No Book Left Behind AKA
Reject list
http://www.jbrownell.com/bks/reject.asp
Rescan List
http://www.jbrownell.com/bks/rescan.asp
----- Original Message ----- From: "robert tweedy" <roberttweedy@xxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Thursday, November 29, 2007 9:46 AM
Subject: [bksvol-discuss] advice


I have noticed that with fine reader it doesn't get the chapter numbers or page numbers but the text is fine but with scan soft it gets everything. Just currious on which one to use. I have to go to fine reader sometimes at the end of a chapter to get it right, scan soft puts the words there and the ones it can't figure out puts them at the bottom, has anyone seen this? I do fiction so know about booksshare's policy reguarding page numbers but if they apear I want to keep them hence using scan soft does the job.
Skype contact bobwichitaks phone 316-524-5454
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.



To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.



To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.



To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.



To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line.  To get a list of 
available commands, put the word 'help' by itself in the subject line.

Other related posts: