Hi, Jenny, If you are unable to pinpoint the problem, you may want to e-mail K1000 Tech Support. Perhaps they can help you figure out what's going on. If you find out anything, please share what you learn with the list. My favorite part about this list is learning from other volunteers. Best wishes, Paula ----- Original Message ----- From: "Jenny Wood" <mellow.yellow@xxxxxxxxxxx> To: <bksvol-discuss@xxxxxxxxxxxxx> Sent: Thursday, January 19, 2006 10:48 AM Subject: [bksvol-discuss] Strange scanning problem > Hi all, > > This is kind of a long shot, but I thought I would post to the list to find > out if anyone else has come across a similar problem as the one I have been > struggling with the past few days. First of all, I am using windows 2000 > with the Kurzweil 1000 software package, and have a Microtech scanner. I > have been working on scanning a novel now for a week or more, and managed to > get through more than half of the book with very few errors or corrections. > However, it seems within the past few days, the quality has become extremely > poor. I have tried cleaning the scanner bed several times, and had my > sighted husband verify that there were still no obvious scratches or smudges > I missed. The quality of the print in the book itself has also not changed. > In fact, I tried rescanning a page from the beginning of the book, and still > came up with very poor quality. It seems that lots of random text is left > out completely, while other words are butchered badly. Rebooting and > shutting everything down completely doesn't seem to have helped either. I > have also unplugged the scanner several times to reset it manually, but no > change. I have tried both version 7 and 9 of the Kurzweil packages, and > both seem to experience the same problem. Everything will scan beautifully > for the first one to two-hundred pages, then the quality degrades > dramatically. Is there possibly some sort of cache of stored pages Kurzweil > keeps somewhere that I could try clearing? I have not yet tried updating > the drivers for the scanner, but will have a look this weekend to see if > there is anything more recent available. The scanner is only about a year > and-a-half old. Could a bad USB cable or flakey A.C. adapter cause this > type of problem? Any suggestions or advice would be greatly appreciated! > > Thanks in advance! > > Jenny > > To unsubscribe from this list send a blank Email to > bksvol-discuss-request@xxxxxxxxxxxxx > put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line. > To unsubscribe from this list send a blank Email to bksvol-discuss-request@xxxxxxxxxxxxx put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.