From: Roger Loran Bailey <rogerbailey81@xxxxxxx>
Subject: [bksvol-discuss] Re: Problem with Open Book
To: bksvol-discuss@xxxxxxxxxxxxx
Date: Tuesday, April 6, 2010, 7:47 PM
No, I do not have Word. I think you
are talking about that 27 step process and that is what I
was unable to accomplish because I do not have the right
equipment. Besides the guy I was talking to from Bookshare
said that is not an ideal solution either because it only
eliminates about 80 to 90 per cent of the unwanted breaks.
_ _ _
"I contend that we are both atheists. I just believe in one
fewer god than you do. When you understand why you dismiss
all the other possible gods, you will understand why I
dismiss yours"
Stephen Roberts
The Militant:
http://www.themilitant.com
Pathfinder Press:
http://www.pathfinderpress.com
Granma International:
http://www.granma.cu/ingles/index.html
----- Original Message ----- From: "Cindy" <popularplace@xxxxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Tuesday, April 06, 2010 9:00 PM
Subject: [bksvol-discuss] Re: Problem with Open Book
If I understand you, your scans come out as ark files. Can
you convert them to Word/ Then you can save them
rtf files.
I can tell you how to get rid of the paragraph symbols at
the end of the lines in Word, in one fell swoop, if you are
careful. It it's what I did for a couple of your books when
Carrie put them on the download list for me to fix
Cindy
Wish List (i.e., books wanted added to the collection) and
books-being-scanned list available at sites below
Wish List: https://wiki.benetech.org/display/BSO/Bookshare+Wish+List
Books Being Scanned List:
https://wiki.benetech.org/display/BSO/Books+Being+Scanned+List
--- On Tue, 4/6/10, Roger Loran Bailey <rogerbailey81@xxxxxxx>
wrote:
> From: Roger Loran Bailey <rogerbailey81@xxxxxxx>
> Subject: [bksvol-discuss] Problem with Open Book
> To: bksvol-discuss@xxxxxxxxxxxxx
> Date: Tuesday, April 6, 2010, 5:05 PM
> Some of you will remember that quite
> some time ago I had a problem with my Open Book 6 such
that
> it was inserting paragraph breaks after every single
line in
> my scans. After getting various suggestions on how to
stop
> it and after none of them worked I finally gave up and
just
> submitted them that way while placing a note in the
comments
> section asking the proofreader to remove them. Since
last
> night and into today I have been in telephone and
email
> contact with both Bookshare and Freedom Scientific
technical
> support. What it comes down to is that my solution is
no
> longer exceptable. A lot of proofreaders have the
same
> problem that I have in not having the software or
expertise
> that allows those breaks to be easily removed and
others
> either do not understand the problem or do not read
the
> comments and submit what they think is a perfectly
good
> proofed book and it has to be sent back. Even when a
proofer
> uses the 27 step process described in the manual, that
is
> not an ideal solution either. I have been told that
for one
> thing it is an advanced technique that is beyond some
> proofers and for another thing it really only removes
maybe
> 80 to 90 per cent of the unwanted breaks. What it
comes down
> to is that I am going to have to solve the problem by
either
> upgrading my software -- an expensive prospect that I
would
> like to avoid -- or find a solution within my current
> software or else quit scanning and go back to
proofreading.
> Even if it is a bit more work I prefer scanning
because that
> way I am more likely to get to work on something I am
> actually interested in. When I skim the checkout list
it is
> clear that most of you do not entirely share my
tastes.
> Right now I would like to ask a couple of questions.
First,
> since people come and go here I want to ask if there
is
> anyone present now who knows how to make Open Book
stop
> this. I doubt that I will get a satisfactory answer to
that
> one because Freedom Scientific technical support today
knew
> of no such settings either. Secondly, let me describe
the
> next step that I have worked out with a certain
Bookshare
> employee. The next step is that I should scan
something in
> RTF rather than ARK and converting it. Now, once, a
long
> time ago, I had the idea that since I had to convert
it to
> RTF anyway I would just scan it that way in the first
place.
> There was some kind of problem with that which I
don't
> remember, but whatever it was I decided that it
wouldn't
> work. Now I am trying again and I don't remember how.
I went
> into my settings and changed the default format to RTF
and
> then I created a new blank document, but when I looked
at it
> it had an ARK extension. I went ahead and scanned a
few
> pages into it and they still had the line break
problem. I
> then converted it to RTF and it still had the line
break
> problem. I then created a new document that turned out
to
> have an ARK extension too and converted it to RTF
while
> there was nothing in it. I then had a blank document
with an
> RTF extension. I scanned a few pages into that and it
still
> had the same problem. The guy at Bookshare said that
he
> didn't really think that constituted scanning in RTF,
so he
> asked me to ask the list how I could scan in RTF. Once
I do
> so I am supposed to email the result to him. So, does
anyone
> know how to do that? And let me add one more question.
How
> much does it cost to upgrade to the latest version of
Open
> Book and, if I went for Kurzweil instead, how much
would
> they cost if I already have Open Book 6? I would hate
to go
> that route because, even though I have added a few
reasons
> for volunteering since I started, including that I
just
> enjoy it, the main reason for becoming a volunteer in
the
> first place was to accumulate credits and defray the
cost of
> a subscription. I really don't have a lot of money to
play
> with.
>
>
> _ _ _
>
> "I contend that we are both atheists. I just believe
in one
> fewer god than you do. When you understand why you
dismiss
> all the other possible gods, you will understand why
I
> dismiss yours"
> Stephen Roberts
>
>
> The Militant:
> http://www.themilitant.com
> Pathfinder Press:
> http://www.pathfinderpress.com
> Granma International:
> http://www.granma.cu/ingles/index.html
> To unsubscribe from this list send a blank Email to
> bksvol-discuss-request@xxxxxxxxxxxxx
> put the word 'unsubscribe' by itself in the subject
> line. To get a list of available commands, put the
> word 'help' by itself in the subject line.
>
>
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject
line. To get a list of available commands, put the
word 'help' by itself in the subject line.
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject
line. To get a list of available commands, put the
word 'help' by itself in the subject line.